Related Questions

Consider the following statements regarding genetic code and choose the correct answer:
1. The genetic code is degenerate
2. In all amino acids the first two bases are the same in all the codons that represent a particular amino acid
3. The number of codons an amino acid can claim is proportional to the frequency of the amino acid in proteins
4. Amino acids with codons ending in U or A also have codons ending in C or G respectively
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
Analysis of a hexapeptide using enzymatic cleavage reveals the following result:
• Amino acid composition of the peptide is: 2R, A, V, S, Y
• Trypsin digestion yields two fragments and the compositions are: (R, A, V) and (R, S, Y)
• Chymotrypsin digestion yields two fragments and the compositions are: (A, R, V, Y) and (R, S)
• Digestion with carboxypeptidase A yields no cleavage product.
Given: Trypsin cleaves at carboxyl side of R. Chymotrypsin cleaves at carboxyl side of Y. Carboxypeptidase A cleaves at amino side of the C-terminal amino acid (except R and K) of the peptide.
The correct amino acid sequence of the peptide is:
PROTPARS counts the minimum number of mutations to change a codon for the first amino acid into a codon for the second amino acid, but only scores those mutations in the mutational path that actually change the amino acid.
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Which of the following statements regarding stress related factors is/are true and false?
1. Burnout Stress Syndrome (BOSS) is a debilirating psychological condition brought about by unrelieved work stress.
2. 'Good' and 'bad' stresses are also referred to as 'Distress' and 'Eustress' respectively.
3. It is natural and healthy to maintain optimal level of stress.
4. Rustout Stress Syndrome (ROSS) is indicative of stress overload.
5. Anxiety is a state of emotional tension characterised by Apprehension, fearfulness, and psychic pain.
Under stress condition, which amino acid accumulated in crop plants
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
Rashna Company collected the following data in its accounting records in 2014 : From the income statement : Depreciation expense Tk. 1,000 Loss on sale of equipment 3,000 From the comparative balance sheet : Beginning balance , equipment Tk. 12,500 Ending balance , equipment 8,000 Beginning balance , accumulated depreciation 2,000 Ending balance , accumulated depreciation 2,400 No new equipment was purchased during the year. The equipment was sold at the end of the year. What was the cash in -flow from the sale of equipment in 2014?