Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Reaction between which of the following will NOT lead to the evolution of Hydrogen gas? (A) Magnesium with dilute hydrochloric acid (B) Copper with dilute hydrochloric acid (C) Sulphur powder with dilute hydrochloric acid (D) Aluminium with dilute hydrochloric acid
Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
Consider the following solution to the producer-consumer synchronization problem. The shared buffer size is ?. Three semaphores empty, full and mutex are defined with respective initial values of 0, ? and 1. Semaphore empty denotes the number of available slots in the buffer, for the consumer to read from. Semaphore denotes the number of available slots in the buffer, for the producer to write to. The placeholder variables, denoted by P, Q, R, and S, in the code below can be assigned either empty or full. The valid semaphore operations are: wait ( ) and signal ( ). Producer: Consumer: do {         wait (P) ;         wait (mutex) ;         //Add item to buffer         signal (mutex) ;         signal (Q) ; } while (1) ; do {          wait (R) ;          wait (mutex) ;          //Consume item from buffer          signal (mutex) ;          signal (S) ; } while (1) ;   Which one of the following assignments to P, Q, R and S will yield the correct solution?
A saturated chlorine solution in water, with addition of acid or base, has a pH of or 1.54, an actual chlorine concentration, Cy, of 0.062 M, a hydrochloric acid concentration of 0.029 M, and HOCl concentration of 0.029.
Mr.Rohan while helping the students of Class IV in adding and subtracting fractions observed that several students are not able to complete the addition of two improper fractions. He gave a small test with questions from the addition of proper fractions (one item of addition of two similar fractions, three items from the addition of proper and improper fractions, and four items from the addition of improper fractions). He analyzed the responses of each student and found that nearly 45% of students were not clear in adding proper with improper fractions which were affecting their performance in adding two improper fractions. He, therefore, focused on developing the understanding of improper fractions and their addition with proper fractions after which he proceeded to teach the addition of two improper fractions. Which kind of assessment is depicted by this situation?
Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid
Twenty–five litres of 40% concentration of an acid solution is added to 35 litres of 70% concentration of the acid solution. What is the concentration of acid in the new solution?
Twenty-five litres of 60% concentration of an acid solution is added to 35 litres of 80% concentration of the acid solution. What is the concentration of acid in the new solution? (correct to one decimal places)
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y.