Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
Two feeds, 10 mole with 5 J/mole and 20 mole with 15 J/mole, product contains two streams, 5 mole with 10 J/mole and P with 25 J/mole, what is the value of P?
Two feeds, 5 mole with 25 J/mole and F with 5 J/mole, product contains two streams, 5 mole with 10 J/mole and 10 mole with 15 J/mole, what is the value of F?
Three feeds, 10 mole with H = 5 J/mole, 10 mole with H = 15 J/mole and 5 mole with 20 J/mole, what is the enthalpy of the products?
Three feeds, 10 mole with H = 25 J/mole, 5 mole with H = 10 J/mole and 15 mole with 20 J/mole, what is the enthalpy of the products?
Three feeds, 10 mole with H = 15 J/mole, 20 mole with H = 5 J/mole and F1 with 20 J/mole, if enthalpy of the products is H = 15 J/mole, what is the value of F1?
A gaseous mixture have the following composition in mole percent and properties Component    Mole percent    Tc(K)    Pc(atm) CH4                       25%         191         45.8 C2H4                     35%          283        50.5 N2                          40%         126         33.5 at 90 atm pressure and 100 degree celsius. P`r and T`r are psuedoreduced values. & P`c and T`c are pseudocitical values. 3-8. Volume per mole according to ideal gas law?
Only if the calculated molar mass is higher than the actual molar mass of the solute, the calculated molar mass is considered to be abnormal molar mass.
What is the enthalpy change of 8 mole solution if the enthalpy change of 5 mole solute is 10 J/mole, and enthalpy of 2 mole solvent is 15 J/mole?
কক্ষ তাপমাত্রায় 1.0 mole এসিটিক এসিড এবং 1.0 mole ইথানলকে মিশ্রিত করা হলো। সাম্যবস্থায় 0.667 mole এসিটিক এসিড ক্রিয়ায় অংশগ্রহণ করলে তার ke এর মান 4.00 হয়। কত মোল এষ্টার উৎপাদিত হবে যদি একই তাপমাত্রায় 4.0 mole এসিড এবং 2.0 mole ইথানাল নেয়া হয়।