Related Questions

Faster rate of drying of moulded refractories results in high __________ of refractories.
A Green strength
B Voids
C Shrinkage
D Both B and C
A mixture contains 2/5 of element A and 3/5 of element B. When 5ml of A is added to the mixture, the proportion of B in the mixture changes to 1/5. What amount of A was originally present in the mixture before the addition was made ?
A 1ml
B 1.5ml
C 2.5ml
D 6ml
A jar contains a mixture of oil and water in the ratio 22 :3 . 50 litres of the mixture was taken out and 25 litres of water was added to it. If water was 34% in the resultant mixture, what was the initial quantity of the mixture (in litres ) in the jar?
A 175
B 150
C 75
D 125
Because of its very high refractoriness of the order of __________ °C, silicon carbide refractories are used in zinc smelting furnace, muffle furnace and for supporting the wares in tunnel kilns.
A 1800
B 2200
C 2400
D 2700
A machine P can print out one lakh books in 8 hours. Machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines are started at 9 A.M.While machine P is stopped at 11 A.M. and remaining two machines completed the work. Approximately at what at what time will the work time (to print one lakh books) be finished?
A 11.30 Am
B 12 Noon
C 12.30 Pm
D 11.35 am
A small factory with 3 machines has a job of stamping out a number of pan covers. The newest machine can do the job is 3 days, another machine can do it in 4 days, and the third machine can do it in 6 days. How many days will the factory take to do the job using all the machine?
A 1.333
B 4.333
C 6
D 13
A machine P can paint one lakh books in 8 hours; machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines started operating at 9 A. M. while machine P is stopped at 11 A. M. and the reamaining two machines completed the work. Approximately at what time will the work (to print one lakh books) be finished?
A 11:30 A. M
B 12:00 noon
C 12:30 P. M.
D 1:00 P. M.
Three years ago, a machine was bought for Tk 1,00,000. The installation cost was Tk 20,000. The machine was depreciated in a straight line method at 20% per year. At the end of the 3rd year, the machine was sold for Tk 46,000. What is the gain/loss from sale of this machine?
A gain of Tk 2,000
B gain of Tk 6.000
C loss of Tk 2,000
D loss of Tk 6,000
E None of these
Fugacity of a component in an ideal gas mixture is euqal to the partial pressure of that component in the mixture. The fugacity of each component in a stable homogeneous solution at contant pressure and temperature __________ as its mole fraction increases.
A Decreases
B Decreases exponentially
C Increases
D Remains constant
Except __________ , all other refractories are bad conductors of electricity (i.e, have low electrical conductivity).
A Fireclay
B Carborundum
C Graphite
D Chromite

Next steps