Related Questions

Sides of equilateral-triangular co-ordinates (on which ternary liquid system is plotted) represent
A A pure component
B A binary mixture
C A ternary mixture
D Partially miscible ternary system
The discharge over a right angled notch is (where H = Height of liquid above the apex of notch)
A $$\frac{8}{{15}}{{\text{C}}_{\text{d}}} \times 2{\text{g}} \times {\text{H}}$$
B $$\frac{8}{{15}}{{\text{C}}_{\text{d}}} \times 2{\text{g}} \times {{\text{H}}^{\frac{3}{2}}}$$
C $$\frac{8}{{15}}{{\text{C}}_{\text{d}}} \times 2{\text{g}} \times {{\text{H}}^2}$$
D $$\frac{8}{{15}}{{\text{C}}_{\text{d}}} \times 2{\text{g}} \times {{\text{H}}^{\frac{5}{2}}}$$
Among the following, which one is a ternary operator?
A +
B :
C –
D ?:
A ternary relationship involves how many entities?
A 3 or less
B 3
C More than 3
D 3 or more
Which constraint requires that the binary relationship indicate all combinations that must appear in the ternary relationship?
A MUST COVER
B MUST NOT
C Both of the above
D None of the above is correct
When mapping a ternary relationship with an associative entity into a relation which of the following is true?
A One relation is created.
B Two relations are created.
C Three relations are created.
D Four relations are created.
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
A 6.09%
B 10%
C 10.75%
D 21.5%
The angle of contact between a glass capillary tube of length 10 cm and a liquid is 90 degree . If the capillary tube is dipped vertically in the liquid, then the liquid:
A Will rise in the tube
B Will get depressed in the tube
C Will rise -up to 10 cm in the tube and will over flow
D Will neither rise nor fall in the tube.
The angle of contact between a glass capillary tube of length 10 cm and a liquid is 90 Degree. If the capillary tube is dipped vertically in the liquid, then the liquid:
A Will rise in the tube
B Will get depressed in the tube
C Will rise-up to 10 cm in the tube and will over flow
D Will neither rise not fall in the tube
The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and re-condensed, then the liquid with the next higher boiling point is then evaporated and re-condensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called
A Cracking
B Fractional distillation
C Full distillation
D Carbonisation

Next steps