Related Questions

A piezometer provided in the pipe measures
A Friction factor
B Static pressure
C Dynamic pressure
D None of these
The pressure of a liquid measured with the help of a Piezometer tube is
A Vacuum pressure
B Gauge pressure
C Absolute pressure
D Atmospheric pressure
The pressure measured with the help of a Piezometer tube is in
A N/mm2
B N/m2
C Head of liquid
D All of these
A Piezometer tube is used only for measuring
A Low pressure
B High pressure
C Moderate pressure
D Vacuum pressure
Piezometer is used to measure
A Pressure in pipe, channels etc.
B Atmospheric pressure
C Very low pressures
D Difference of pressure between two points
Opening the file,the detective took out a newspaper cutting.He 'opening' is a/an
A Gerund
B Noun
C Present participle
D Adjective
An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called
A Weir
B Notch
C Orifice
D None of these
Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm)
A 0.01 L.S
B 0.087 L.S
C L.S
D $$\frac{{{\text{L}}.{\text{S}}}}{{0.087}}$$
An R.C.C. lintel is spanning an opening of 2m span in a brick wall. The height of the roof is 2.9m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus
A Triangular load of the wall
B UDL of wall
C UDL of wall + load from the roof
D Triangular load + load from the roof
When the load on the engine increases, it becomes necessary to increase the supply of working fluid and when the load decreases, less working fluid is required. The supply of the working fluid to the engine is controlled by a
A D-slide valve
B governor
C Meyer’s expansion valve
D flywheel

Next steps