Related Questions

The velocity profile exhibited by laminar flow of Newtonion fluids is such that the velocity distribution w.r.t. radius of the circular pipe is a/an __________ with the apex at the centre line of the pipe.
A Hyperbola
B Parabola
C Semi-circle
D Semi-ellipse
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. Which of the following, if given to the mixing vat operator as an instruction, would not determine the setting of any other valve ?
A S must be open
B T must be open
C U must be open
For laminar flow of Newtonion fluid in a circular pipe, the velocity distribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship.
A Logarithmic
B Parabolic
C Hyperbolic
D Linear
Laminar flow of a Newtonion fluid ceases to exist, when the Reynolds number exceeds
A 4000
B 2100
C 1500
D 3000
A fluid is termed as the Newtonion fluid, when the shear stress is __________ the velocity gradient.
A Independent of
B Inversely proportional to
C Directly proportional to
D None of these
Sewage sludge is __________ type of non-Newtonion fluid.
A Dilatant
B Bingham plastic
C Pseudo plastic
D None of these
A Newtonion fluid is that
A Which follows Newton
B Which needs a minimum shear, before it starts deforming
C For which shear & deformation are related as $$\tau = \mu \frac{{\partial {\text{u}}}}{{\partial {\text{y}}}}$$
D None of these
A Newtonion liquid (ρ = density, μ = viscosity) is flowing with velocity v in a tube of diameter 'D'. Let Δp be the pressure drop across the length 'L'. For a laminar flow, Δp is proportional to
A L ρv²/D
B L μ;V/D²
C D ρv²/L
D Μ V/L
For turbulent flow of newtonion fluid in a circular cross-section pipe, the ratio of maximum to average fluid velocity is
A 0.5
B 1
C 0.66
An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonion fluid beyond yield stress. Which of the following is an ideal plastic?
A Sewage sludge
B Rubber latex
C Blood
D Sugar solution

Next steps