Related Questions

The ratio of average fluid velocity to the maximum velocity in case of laminar flow of a Newtonion fluid in a circular pipe is
A 0.5
B 1
C 2
D 0.66
For laminar flow of Newtonion fluid in a circular pipe, the velocity distribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship.
A Logarithmic
B Parabolic
C Hyperbolic
D Linear
A water tank with 64-gallon capacity is filled by pipe A and emptied by pipe B. If the rate of water flow through pipe A is 2 gallons per hour, how many gallons per hour should flow through pipe B so that when both pipes are open, the initially empty tank shold be full in exactly 96 hours?
A 3/8
B 4/3
C 2/3
D 8/3
The velocity profile exhibited by laminar flow of Newtonion fluids is such that the velocity distribution w.r.t. radius of the circular pipe is a/an __________ with the apex at the centre line of the pipe.
A Hyperbola
B Parabola
C Semi-circle
D Semi-ellipse
Water flows into an empty 64-gallon drum through pipe A and flows out through pipe B. If the rate of flow through A is 2 gallons/hour, how many gallons per hour must flow out through pipe B so that the drum is full in exactly 96 hours?
A 3/8
B 1/2
C 2/3
D 4/3
A tank is filled by three pipes with uniform flow. The first two pipes operating simultaneously fill the tank in the same time during which the tank is filled by the third pipe alone. The second pipe fills the tank 5 hours faster than the first pipe and 4 hours slower than the third pipe. The time required by the first pipe is:
A 6 hours
B 10 hours
C 15 hours
D 30 hours
Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the
A Length of the pipe
B Diameter of the pipe
C Density of the fluid
D Velocity of the fluid
The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid.
A Newtonion
B Dilatant
C Pseudo-plastic
D Non-Newtonion
The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop fo __________ fluid.
A Dilatant
B Pseudo-plastic
C Bingham plastic
D Newtonion
The fluid velocity varies as the cube of the cylinderical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid.
A Newtonion
B Pseudoplastic
C Dilatent
D Bingham plastic

Next steps