Related Questions

In a single row impulse turbine, the absolute velocity of steam leaving the turbine is 900 m/s. The nozzle angel is 20°. The mean blade speed is 300 m/s. The inlet blade angle is equal to the outlet blade angle. Determine the angle made by the discharging steam with the tangent of the wheel at the exit of moving blade. Neglect friction on turbine blades.
A simple impulse turbine has a mean blade speed of 250 m/s. The nozzle angle is 20° and the steam velocity from the nozzle is 600 m/s. The turbine uses 3000 kg/h of steam. The blade outlet angle is 25°. Determine the amount of energy converted to heat by blade friction if the blade friction factor is 0.86.
In a single row impulse turbine, steam leaves the nozzle at 600 m/s. The nozzle angle and the mean blade speed is 25° and 200 m/s. The blade velocity coefficient is 0.8. Determine the blade outlet angle if the steam leaves the turbine blades axially.
In a Parson’s reaction turbine, the outlet angle of blade is 25°. Calculate the work done per second by the blades if the blade mean blade speed is 60 m/s and the absolute velocity of the steam leaving the nozzle is 120 m/s. The mass flow rate of steam is 0.1 kg per second.
Choose the sentence (s) in which the word 'straight means 'honest or frank'. (1) Draw a straight line through the two points. (2) You are not being straight with me, even though you know that I like straight answers. (3) It was a straight choice between taking or leaving the offer of friendship.
Steam issues from the nozzle with a velocity of 1000 m/s in a De Laval turbine. The nozzle angle is 20°, mean blade velocity is 350 m/s. The inlet and outlet angles of the blades are equal. The mass of the steam flowing through the turbine per second is 0.3 kg. Calculate the tangential force on the blades. Take blade velocity coefficient as 0.8.
If for a certain simple impulse turbine, the blade inlet and outlet angles are 35° and 30° respectively and the relative velocity of steam to moving blade at entrance and exit are 350 m/s and 320 m/s respectively, determine the axial thrust on the bearings. The turbine has a steam flow rate of 20 kg/s.
In a De laval turbine, steam leaves nozzle with a velocity of 1300 m/s. The nozzle angle is 25° and the mean blade speed is 500 m/s. The inlet and outlet blade angles are equal. Find out work done per kg of steam if the blades of the turbine are frictionless.
For straight blades, the minimum blade height is __________ of the mean blade ring diameter.
A turbine is said to have an axial discharge when the steam leaves the blade tip at __________ to the direction of the blade motion.