Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching?

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? Correct Answer Butyl alcohol

Related Questions

Which of the following solvents is used for the extraction of H₃PO₄ from CaCl₂ solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching?
Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Reaction between which of the following will NOT lead to the evolution of Hydrogen gas? (A) Magnesium with dilute hydrochloric acid (B) Copper with dilute hydrochloric acid (C) Sulphur powder with dilute hydrochloric acid (D) Aluminium with dilute hydrochloric acid
In the manufacture of orthophosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesriable
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
A 60% spirit solution is mixed with r% spirit solution in the ratio 1 : 3 such that a s% spirit solution is obtained. When a (s/3)% spirit solution is mixed with 55% spirit solution in equal ratio, an (r/2)% spirit solution is obtained. Which of the following can be determined? (A) Value of ‘r’ (B) Value of ‘s’ (C) Volume of the 60% spirit solution mixed initially (D) If 9 liters of r% spirit solution was mixed initially, what was the volume of the s% spirit solution thus obtained?
Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid
What will be the extraction factor of the process of extraction for the first stage of the extraction under the staged counter current process of extraction?
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y. 
In a liquid-liquid extraction, 10 kg of a solution containing 2 kg of solute C and 8 kg of solvent A is brought into contact with 10 kg of solvent B. Solvent A and B are completely immiscible in each other whereas solute C is soluble in both the solvents. The extraction process attains equilibrium. The equilibrium relationship between the two phases is Y* = 0.9X, where Y* is the kg of C/kg of B and X is kg of C/kg of A. Choose the correct answer.