Related Questions

The thickness of laminations used in a transformer is usually
A 0.4 mm to 0.5 mm
B 4 mm to 5 mm
C 14 mm to 15 mm
D 25 mm to 40 mm
Which of the following could be lamina proximately the thickness of laminations of a D.C. machine?
A 0.005 mm
B 0.05 mm
C 0.5 m
D 5 m
Laminations of core are generally made of
A Case iron
B Carbon
C Silicon steel
D Stainless steel
The degree of mechanical vibrations produced by the laminations of a transformer depends on
A tightness of clamping
B gauge of laminations
C size of laminations
D all of the above
The transformer laminations are insulated from each other by
A mica strip
B thin coat of varnish
C paper
D any of the above
The noise resulting from vibrations of laminations set by magnetic forces, is termed as
A Magnetostriction
B Boo
C Hum
D Zoom
A machine P can print out one lakh books in 8 hours. Machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines are started at 9 A.M.While machine P is stopped at 11 A.M. and remaining two machines completed the work. Approximately at what at what time will the work time (to print one lakh books) be finished?
A 11.30 Am
B 12 Noon
C 12.30 Pm
D 11.35 am
A small factory with 3 machines has a job of stamping out a number of pan covers. The newest machine can do the job is 3 days, another machine can do it in 4 days, and the third machine can do it in 6 days. How many days will the factory take to do the job using all the machine?
A 1.333
B 4.333
C 6
D 13
A machine P can paint one lakh books in 8 hours; machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines started operating at 9 A. M. while machine P is stopped at 11 A. M. and the reamaining two machines completed the work. Approximately at what time will the work (to print one lakh books) be finished?
A 11:30 A. M
B 12:00 noon
C 12:30 P. M.
D 1:00 P. M.
Three years ago, a machine was bought for Tk 1,00,000. The installation cost was Tk 20,000. The machine was depreciated in a straight line method at 20% per year. At the end of the 3rd year, the machine was sold for Tk 46,000. What is the gain/loss from sale of this machine?
A gain of Tk 2,000
B gain of Tk 6.000
C loss of Tk 2,000
D loss of Tk 6,000
E None of these

Next steps