Related Questions

STP-তে একটি আদর্শ গ্যাসকে প্রথমে তার প্রাথমিক আয়তনের এক-তৃতীয়াংশে সংকুচিত করা হয়, এবং তারপর প্রসারিত হতে দেওয়া হয় যতক্ষণ না তার চাপ প্রাথমিক চাপের অর্ধেক হয়। উভয় প্রক্রিয়ায় গ্যাসের তাপমাত্রা স্থির থাকে। যদি গ্যাসের প্রাথমিক অভ্যন্তরীণ শক্তি । হয়ে থাকে তাহলে এর চূড়ান্ত অভ্যন্তরীণ শক্তি কত? (An ideal gas at STP is first compressed to one-third of its initial volume and then allowed to expand until its pressure is half the initial pressure. The temperature of the gas remains constant during both the processes. If the initial internal energy of the gas is U, what is its final internal energy?)
A U/3
B U/2
C U
D 2U/3
Ordinary Portland Cement এর Initial Setting Time কত?
A ৫ মিনিট
B ১০ মিনিট
C ৩০ মিনিট
D ৫ ঘণ্টা
Initial setting time of cement for asbestos cement products should be not less than
A 30 minutes
B 50 minutes
C 75 minutes
D 90 minutes
To retard the initial setting time of cement, the compound responsible, is
A Tri-calcium silicate
B Gypsum
C Di-calcium silicate
D Tri-calcium aluminate
The initial setting time for ordinary Portland cement as per IS specifications should not be less than
A 10 minutes
B 30 minutes
C 60 minutes
D 600 minutes
If ‘P’ is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is
A 0.70 P
B 0.75 P
C 0.80 P
D 0.85 P
Initial setting of cement is caused due to
A Tri-calcium silicate
B Di-calcium silicate
C Tri-calcium aluminate
D Tetra calcium alumino ferrite
The main constituent of cement which is responsible for initial setting of cement is
A Dicalcium silicate
B Tricalcium silicate
C Tricalcium aluminate
D All of the above
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. Which of the following, if given to the mixing vat operator as an instruction, would not determine the setting of any other valve ?
A S must be open
B T must be open
C U must be open
A train travels from New York to Chicago, a distance of approximately 840 miles, at an average rate of 60 miles per hour and arrives in Chicago at 6:00 in the evening , Chicago time . At what hour in the morning, New York City time, did the train depart for Chicago time . At what hour in the morning , New York City time, did the train depart for Chicago ? ( Chicago time is one hour earlier than New York City time.)
A 4 : 00
B 5 : 00
C 6 : 00
D 7 : 00

Next steps