Related Questions

A hydraulic structure is designed to withstand
A Seepage forces
B Hydraulic jump
C Hydraulic pressure
D All the above
If the resultant of two equal forces has the same magnitude as either of the forces, then the angle between the two forces is
A 30°
B 60°
C 90°
D 120°
For designing masonry components of a structure, seismic forces provision in the design calculation is not necessary for buildings constructed in
A Zone I only
B Zone I and II
C Zone I, II and III
D Zone I, II, III and IV
On sports day. if 30 children were made to stand in a column, 16 columns could be formed. If 24 children were made to stand in a column,how many columns could be formed?
A 45
B 20
C 22
D 29
On sports day, if 30 children were made to stand in a column, 16 columns could be formed. If 24 children were made a stand in a column, how many columns could be formed ?
A 40
B 20
C 22
D 30
Diameter of bubble caps used in high pressure columns is __________ as compared to that used in identical vacuum columns.
A Less
B More
C Same
D Either A or B; no generalisation can be made
If the foundations of all the columns of a structure are designed on the total live and dead load basis, then
A There will be no settlement of columns
B There will be no differential settlement
C The settlement of exterior columns will be more than interior columns
D The settlement of interior columns will be more than exterior columns
The bracing between two columns of a steel tank will be designed to resist
A Horizontal shear due to wind or earthquake only
B Horizontal, shear due to wind or earthquake + 2.5% of column loads
C Column loads + 2.5% of horizontal shear due to wind or earthquake
D Column loads + full horizontal shear due to wind or earthquake
For a cylinderical internally pressurised vessel, which of the following closure types would withstand highest pressure, if each closure is of the same material and thickness?
A Hemispherical
B Ellipsoidal (2 : 1)
C Conical
D Flat plate
Capacity of a refractory brick to withstand-sudden changes in temperature is denoted by the property called
A Spalling resistance
B Refractoriness
C Refractoriness under load (RUL)
D None of these

Next steps