The bracing between two columns of a steel tank will be designed to resist

The bracing between two columns of a steel tank will be designed to resist Correct Answer Horizontal, shear due to wind or earthquake + 2.5% of column loads

Bissoy MCQ

Related Questions

Two tanks are filled to capacity with automobile fuel. The first tank holds 600 gallons more than the second tank. If 100 gallons were to be pumped from each tank, the first tank would then contain 3 times as much fuel as the second tank. What is the total number of gallons of fuel in the two full tanks?
The sway bracing is designed to transfer
A tank is fitted with 8 pipes, some of them that fill the tank and others that are waste pipe meant to those that empty the tank can empty it in 6 hours. If all the pipes are kept open when the tank is full, it will take exactly 6 hours for the tank to empty. How many of these are these are fill pipes?
An empty fuel tank of a car was filled with A type petrol. When the tank was half-empty, it was filled with B type petrol. Again when the tank was half-empty, it was filled with A type petrol. When the tank was half-empty again, it was filled with B type petrol. What is the percentage of A type petrol at present in the tank?
An empty fuel tank of a car was filled with A type petrol. When the tank was half-empty, it was filled with B type petrol. Again when the tank was half-empty, it was filled with A type petrol. When the tank was half-empty again, it was filled with B type petrol. What is the percentage of A type petrol at present in the tank ?
Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter)
Two tanks A and B are filled with petrol. Tank A holds 600 liters more than B. If 100 liters of petrol were taken out from each tank, tank A would then contain 3 times as much petrol as tank B. What is the total number of liters of fuel in the two full tanks?
Two tanks A and B are are filled with petrol. Tank A holds 600 litre more than tank B. If 100 litre of petrol were taken out from each tank A would then contain 3 times as much petrol as tank B. What is the total number of litre of fuel in the two full tanks?
Two taps A and B can fill a tank in 5 hours and 20 hours respectively. If both the taps are open then due to a leakage, it took 30 minutes more to fill the tank. If the tank is full, how long will it take for the leakage alone to empty the tank ?
A water tank has two taps (Tap-1 and Tap-2) . Tap -1 can fill a tank in 8 hours and Tap-2 can empty the tank in 16 hours . How long will they take to fill the tank if both taps are opened simultaneously but Tap-2 is closed after 8 hours ?