Bissoy.com
Doctors Medicines MCQs Q&A

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be.

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. Correct Answer Parabolic with convexity downward

Related Questions

Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
A prestressed concrete beam span 10mm of rectangular section, 120mm wide & 300mm deep is axially prestressed on effective force of 180kn, uniformly distributed load of 5kn/m include the self weight of member. Find maximum shear stress at support?
The difference between the two types of loading namely uniformly distributed and the non-uniformly distributed loading is that:
A pre-stressed rectangular beam which carries two concentrated loads W at $$\frac{{\text{L}}}{3}$$ from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is
A precast pretensioned beam of rectangular section has a breadth of 100mm and depth of 200mm and the beam with an effective span of 5mm is prestressed by tendon with their centroidal coinciding with the bottom kern and the initial force in the tendons is 150kn. Find prestressing force?
If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme top edge
Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
There are two types of loading. The uniformly distributed and the non-uniformly distributed that is the one having two different values at corners.
If the beam supports uniformly distributed load the tendon follows.
Which of the following statements is/are true about the advantages of prestressed concrete structure? A. In the prestressed concrete structure, the deflection of beams is considerably reduced. B. Prestressing decreases cracks in concrete under all stages of loading. C. Prestressed concrete requires only 1/3 rd of the concrete required for R.C.C.