Related Questions

To avoid the tearing off the plate of an edge, the margin (i.e., the minimum distance from the centre of the rivet hole to the nearest edge of the plate) should be equal to
A 0.5 d
B D
C 1.5 d
D 2.5 d
In order to avoid tearing of the plate at an edge, the distance from the centre line of the rivet hole to the nearest edge of the plate should be equal to (where d = Diameter of rivet hole)
A 1 d
B 1.5 d
C 2.5 d
D 2 d
In order to avoid tearing of the plate at edge, the distance from the center line of the rivet hole to the nearest edge of the plate in terms of dia. of rivet d should be equal to
A 1 d
B 1.25 d
C 1.5 d
D 1.75 d
In order to avoid tearing off the plate at an edge, the distance from the center of the rivet hole to the nearest edge of the plate (i.e. margin) should be (where d = Diameter of rivet hole in mm)
A d
B 1.5 d
C 2 d
D 2.5 d
The tensile strength of the welded joint for double fillet is (where s = Leg or size of the weld, $$l$$ = Length of weld and $${\sigma _{\text{t}}}$$ = Allowable tensile stress for weld metal)
A $$0.5\,{\text{s}}l{\sigma _{\text{t}}}$$
B $${\text{s}}l{\sigma _{\text{t}}}$$
C $$\sqrt 2 \,{\text{s}}l{\sigma _{\text{t}}}$$
D $$2\,{\text{s}}l{\sigma _{\text{t}}}$$
The distance between the centre of a rivet hole to the nearest edge of the plate is called
A Pitch
B Margin
C Back pitch
D None of these
The electrode tip diameter (d) in spot welding should be equal to (where t = Thickness of plate to be welded)
A $$\sqrt {\text{t}} $$
B 1.5 t
C 3 t
D 6 t
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)
A $$\sigma \left( {1 + \frac{{\text{b}}}{{2{\text{a}}}}} \right)$$
B $$\sigma \left( {1 + \frac{{2{\text{a}}}}{{\text{b}}}} \right)$$
C $$\sigma \left( {1 + \frac{{\text{b}}}{{3{\text{a}}}}} \right)$$
D $$\sigma \left( {1 + \frac{{3{\text{a}}}}{{\text{b}}}} \right)$$
The distance between the center of a rivet hole to the nearest edge of plate, is called
A Margin
B Pitch
C Back pitch
D Diagonal pitch
In backhand welding, the angle between the welding rod and the work is ________ as compared to forehand welding.
A Same
B Less
C More
D None of these

Next steps