Related Questions

Grinding wheel made of silicon carbide is most suitable for grinding materials of low tensile strength (e.g; tough bronze). Grinding is a __________ operation.
A Turning
B Dressing
C Forming
D Surface finishing
A fine grained grinding wheel should not be used for grinding __________ materials.
A Hard
B Brittle
C Soft & ductile
D None of these
For grinding of softer materials, the grinding wheel should have __________ grain size.
A Finer
B Coarser
C Medium
D Any type of
A circular wheel 28 inches in diameter rotates the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minutes does the larger wheel make in terms of x?
A 12x
B 24x
C 36x
D 48x
A wheel that has 6 cogs is meshed with a wheel of 14 cogs. When the smaller wheel has made 21 revolutions the number of revelution made by the larger wheel is --
A 4
B 9
C 12
D 49
A circular wheel 28 inches in diameter rotates (moves) the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minute does the larger wheel make in terms of x?
A 12x
B 48x
C 24x
D 36x
A _________ grinding wheel is used to grind soft materials.
A Course grained
B Medium grained
C Fine grained
D None of these
A wheel that had 6 cogs in meshed with a larger wheel if 14 cogs. When the smaller wheell had made 21 revolutions, the number wheel will be-
A 5
B 8
C 10
D 9
The fundamental equation for correct steering is (where $$\varphi $$ and $$\alpha $$ = Angle through which the axis of the outer wheel and inner wheel turns respectively, c = Distance between the pivots of the front axles and d = Wheel base)
A $$\sin \varphi + \sin \alpha = \frac{{\text{b}}}{{\text{c}}}$$
B $$\cos \varphi - \sin \alpha = \frac{{\text{c}}}{{\text{b}}}$$
C $$\cot \varphi - \cot \alpha = \frac{{\text{c}}}{{\text{b}}}$$
D $$\tan \varphi + \cot \alpha = \frac{{\text{b}}}{{\text{c}}}$$
A grinding wheel is said to be of _________ if the abrasive grains can be easily dislodged.
A Soft grade
B Medium grade
C Hard grade
D None of these

Next steps