Related Questions

A water tank has two taps (Tap-1 and Tap-2) . Tap -1 can fill a tank in 8 hours and Tap-2 can empty the tank in 16 hours . How long will they take to fill the tank if both taps are opened simultaneously but Tap-2 is closed after 8 hours ?
A 10
B 12
C 14
D 16
A water tank has two taps ( Tap-1 and Tap-2) : Tap-1 can fill a tank in 8 hours and Tap-2 can empty the tank in 16 hours . How long will they take to fill the tank if both taps are opened simultaneously but Tap -2 is closed after 8 hours?
A 10
B 12
C 14
D 16
A tank can be filled by a tap in 20 minutes and by another tap in 60 minutes . Both the taps are kept open for 10 minutes and then the first tap is shut off. After this , the tank will be completely filled in what time ?
A 10 min
B 15 min
C 20 min
D 25 min
A tank can be filled by a tap in 20 minutes and by another tap in 60 minutes . Both the taps are kept open for 10 minutes and then the first tap is shut off. After this, the tank will be completely filled in what time?
A 10 min
B 15 min
C 20 min
D 25 min
A water tank has two taps (Tap1 -Tap2) . Tap -1 can fill a tank in 8 hours and Tap- 2 can empty the tank in 16 hours. How long will they take to fill the tank if both taps are opened simultaneously but tap-2 is closed after 8 hours?
A 10
B 12
C 14
D 16
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)
A $$\sigma \left( {1 + \frac{{\text{b}}}{{2{\text{a}}}}} \right)$$
B $$\sigma \left( {1 + \frac{{2{\text{a}}}}{{\text{b}}}} \right)$$
C $$\sigma \left( {1 + \frac{{\text{b}}}{{3{\text{a}}}}} \right)$$
D $$\sigma \left( {1 + \frac{{3{\text{a}}}}{{\text{b}}}} \right)$$
When screw threads are to be used in a situation where power is being transmitted in one direction only, then the screw threads suitable for this will be
A Knuckle threads
B Square threads
C Acme threads
D Buttress threads
A tailor had a number of shirt pieces to cut from some large pieces of fabric. He cut each large piece into 10 smaller pieces. He cut at the rate of 45 cuts per minute . How many large pieces would be cut in 24 minutes?
A 32
B 54
C 108
D 120
A tailor had a number of shirt pieces to cut from large piece pieces of fabric. He cut each large piece into 10 smaller pieces. He cut at the rate of 45 cuts per minute. How many large pieces would be cut in 24 minutes?
A 32
B 54
C 108
D 120
A tailor had a number of shirt pieces to cut from a roll of fabric. He cut each roll of equal length into 10 pieces. He cut at the rate of 45 cuts a minute. How many rolls would be cut in 24 minutes ?
A 32 rolls
B 54 rolls
C 108 rolls
D 120 rolls

Next steps