Related Questions

The condition that causes vapour locking in a brake system is
A Overheating of the fluid due to frequent brake application
B Overcooling of the brakes during high speed driving
C Keeping the vehicle without use for an extended period
D An excessively high engine speed on a downhill road
A locking device in which the bottom cylindrical portion is recessed to receive the tip of the locking set screw, is called
A Ring nut
B Castle nut
C Sawn nut
D Jam nut
The sequence in which the force is transmitted through a brake system when the brake pedal is depressed is
A Brake pedal, Master cylinder, Brake lines, Vacuum servo mechanism, Brake pads
B Brake pedal, Vacuum servo mechanism, Master cylinder, Brake lines, Brake pads
C Brake pedal, Master cylinder, Vacuum servo mechanism, Brake lines, Brake pads
D Brake pedal, Brake lines, Vacuum servo mechanism, Master cylinder, Brake pads
In recent times, the “dynamic brake system” is becoming popular in modern railways. The dynamic brake system coverts Kinetic energy to________:
A Potential energy
B Electricity
C Sound energy
D Magnetic energy
In a vapour compression system, the condition of refrigerant is dry saturated vapour
A Before entering the compressor
B After leaving the compressor
C Before entering the condenser
D After leaving the condenser
In vapour compression cycle the condition off refrigerant is dry saturated vapour
A After passing through the condenser
B Before passing through the condenser
C After passing through the expansion or throttle valve
D Before entering the compressor
Vapour which is at a pressure smaller than the saturation pressure for the temperature involved is called a __________ vapour.
A Superheated
B Desuperheated
C Non-condensable
D None of these
True vapour pressure of a petroleum fraction __________ Reid vapour pressure.
A Is less than
B Is more than
C Is same as
D May be either more or less than
In a vapour absorption refrigeration system, the compressor of the vapour compression system is replaced by
A Liquid pump
B Generator
C Absorber and generator
D Absorber, generator and liquid pump
The ratio of actual mass of water vapour in a given volume of moist air to the mass of water vapour in the same volume of saturated air at the same temperature and pressure, is called
A Humidity ratio
B Relative humidity
C Absolute humidity
D Degree of saturation

Next steps