Related Questions

Forced circulation evaporators are useful for the concentration of viscous, salting and scale forming liquors. Which of the following is a forced circulation evaporator?
A Long vertical evaporator
B Horizontal tube evaporator
C Agitated film evaporator
D Calenderia vertical tube evaporator
The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid.
A Viscosity
B Density
C Thermal conductivity
D Corrosive nature
A forced circulation long tube vertical evaporator as compared to the natural circulation evaporator
A Is economical in operation
B Employs high velocity, high heat transfer rate and less heating surface requirement
C Employs a centrifugal pump placed between external downtake from vapor drum and inlet to tube bundle
D Both B & C
Which of the following boiler works on a forced circulation of water?
A Lamont boiler
B Benson boiler
C Loeffler boiler
D All of these
while there is -- single newspaper with a large national circulation, many magazines have national circulation .
A not
B noe
C no
D not any one
The diameter of tubes for natural circulation boiler as compared to controlled circulation boilers is
A More
B Less
C Same
D Could be more or less depending on other factors
In forced circulation steam boilers, the force is applied
A To draw water
B To circulate water
C To drain off the water
D All of these
In forced circulation type boiler
A Heating takes place at bottom and the water supplied at bottom gets converted into the mixture of steam bubbles and hot water which rise to drum
B Water is supplied in drum and through down comers located in atmospheric condition it passes to the water wall and rises to drum in the form of mixture of water and steam
C Feed pump is employed to supplement natural circulation in water wall type furnace
D Water is converted into steam in one pass without any recirculation
The forced oil and air circulation method is usual one for transformers of capacities
A upto 5 MVA
B upto 10 MVA
C upto 20 MVA
D 30 MVA upwards
In forced circulation, the heating element is injected
A Internally
B Externally
C Both A and B
D Neither A nor B

Next steps