A valve which maintains a constant degree of superheat at the end of the evaporator coil, is called

A valve which maintains a constant degree of superheat at the end of the evaporator coil, is called Correct Answer Low side float valve

Low Side Float Valves. The low side float type of the throttling valve is usually used in the flooded type of the refrigeration plants
A valve which maintains a constant degree of superheat at the end of the evaporator coil, is called Low Side Float Valves.
Bissoy MCQ

Related Questions

একটি স্টেপ আপ ট্রান্সফরমারে, গৌণ কুণ্ডলীর পাকসংখ্যা মুখ্য কুন্ডলীর পাকসংখ্যার দ্বিগুণ। যদি মূখ্য কুন্ডলীকে কোন পরিবর্তী বিদ্যুৎ লাইনের সাথে সংযুক্ত করা হয়, তাহলে মুখ্য কুণ্ডলীর তুলনায় গৌণ কুণ্ডলীতে- (In a step up transformer, the number of turns in the secondary coil is twice to that of primary coil. If you apply an alternating current in the primary coil, then in the secondary coil compared to the primary coil-)
In an iron cored coil the iron core is removed so that the coil becomes an air cored coil. The inductance of the coil will
A certain amount of current flows through a ring shaped coil with fixed number of turns. How does the magnetic induction B varies inside the coil if an iron core is threaded into coil without dimensional change of coil?
For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is
He maintains a clandestine link with the Education Adviser. This 'means he maintains a
He maintains a clandestine link with the godfather this means that he maintains-
A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the voltage induced across the coil will
Most thermostatic expansion valves are set for a superheat of
In a steam engine, the earlier cut-off with a simple slide valve may be obtained by increasing the steam lap and the angle of advance of the eccentric but keeping constant the travel and lead of the valve, this method will
For the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is