Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Point A is 3m in the north of point B. Point D is 2m in the east of point E. Point F is 9m in the west of point G. Point C is 4m in the west of point B. Point C is 3m in the south of point D. Point F is 5m in the south of point E. Point H is 5m in the north of point G. What is the shortest distance between point H and point A?
How far is point 'R' from Point 'T'? Statement (I): Point 'R' is 5 metres to the north of point 'M'. Point 'U' is 4 metres to the east of point 'R'. Point 'T' is to the west of point 'R' such that points 'U' 'R' and 'T' form a straight line of  metres. Statement (II): Point 'Z' is metres to the south of point 'T'. Point 'U' is  metres to the east of point 'T'. Point 'M' is  metres to the east of point 'Z'. Point 'R' is  metres to the north of point 'M'. Point 'R' lies on the line formed by joining points 'T' and 'U'.
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. If point G is 4m to the north of Point H, then what is the distance between H and D?
Point P is 4m in the west of point V. Point R is 6m in the north of point Q. Point T is 5m in the south of point S. Point V is in the middle of point R and Q. Point U is 5m in the east of point R. Point V is in north of point Q. Point S is 5m in the east of point V. What is the area of triangle formed by point P, R and Q?
Garima starts walking towards the south from point R. He walks for 5m to reach Point S then turns right and walks for 2m to reach point T from there he turns left and walks for 3m to reach Point Z. He then turns right from point Z and walks for 6m to reach point Y and then turns right and walks for 3m to reach point X. He then turns right from point X and walks for 4m to reach point W and then turns left and walks for 5m to reach point V and then turns left and walks for 4m till point U and stops. What is the shortest distance between point V and point R?
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. How far and in which direction is Point G from Point A?
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the radius of Mohr circle which can be made from the shear stress and tensile stress acting on bolts.(Consider bolt under max stress and area of bolt is A)
Point A is 5m in the north of point B. Point D is 5m in the south of point C. Point E is 16m in the north of point F. Point D is 6m in the west of point G, which is the midpoint of line formed by E and F. Point D is 3m in the east of point B. What is the shortest distance between point D and point F?
Consider the following statements: The basic reason why shafts are made of steel and its alloys is: 1. The shaft is subjected to normal stress. 2. The shaft stress alternates with respect to time. 3. The shaft is subjected to pure compressive stress. 4. The shaft is subjected to the stress of constant intensity. Which of these statements are correct?