Two bars of different materials and same size are subjected to the same tensile force. If the bars have unit elongation in the ratio of 2 : 5, then the ratio of modulus of elasticity of the two materials will be

Two bars of different materials and same size are subjected to the same tensile force. If the bars have unit elongation in the ratio of 2 : 5, then the ratio of modulus of elasticity of the two materials will be Correct Answer 5 : 2

Bissoy MCQ

Related Questions

Connie has a number of gold bars, all of different weights. She gives the 24 lightest bars, which weigh 45% of the total weight, to Brennan. She gives the 13 heaviest bars, which weigh 26% of the total weight, to Maya. She gives the rest of the bars to Blair. How many bars did Blair receive?
Calculate ultimate moment and shear of effective span is 30m, live load is 9kn/m, dead load excluding self weight is 2kn/m, load factors for dead load is 1.4 for live load is 1.6 cube strength of concrete fcu is 50n/mm2 cube strength at transfer is fci is 35n/mm2, tensile strength of concrete Ec is 34kn/mm2 loss ratio ɳ is 0.85 and 8mm diameter high tensile strength fpu is 1500n/mm2 are available for use and the modulus of elasticity of high tensile wires is 200kn/mm2?
The tensile modulus values of the interply hybrid laminate are between that of the low elongation and high elongation fiber composites.
A member ABCD is subjected to points load P1=45kN, P2, P3=450kN and P4=130kN. What will be the total elongation of the member, assuming the modulus of elasticity to be 2.1x105N/mm2. The cross sectional area is 625mm, 2500mm, 1250mm respectively.
If E, N, K and $$\frac{1}{{\text{m}}}$$ are modulus of elasticity, modulus of rigidity. Bulk modulus and Poisson ratio of the material, the following relationship holds good
If the modulus of elasticity for a given material is twice its modulus of rigidity, then bulk modulus is equal to
Elastic failure of a material occurs, when the tensile stress equals yield strength, yield point or the elastic limit. Also, the elastic failure occurs according to maximum strain theory, when the maximum tensile strain equals (where, $$\sigma $$ = yield strength and E = modulus of elasticity)
The change in length due to a tensile or compressive force acting on a body is given by (where P = Tensile or compressive force acting on the body, $$l$$ = Original length of the body, A = Cross-sectional area of the body and E = Young's modulus for the material of the body)
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The minimum normal stress will be