Related Questions

The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
The natural frequency of free transverse vibrations due to uniformly distributed load acting over a simply supported shaft is (where $$\delta {\text{S}}$$ = Static deflection of simply supported shaft due to uniformly distributed load)
A $$\frac{{0.4985}}{{\sqrt {\delta {\text{S}}} }}$$
B $$\frac{{0.5615}}{{\sqrt {\delta {\text{S}}} }}$$
C $$\frac{{0.571}}{{\sqrt {\delta {\text{S}}} }}$$
D $$\frac{{0.6253}}{{\sqrt {\delta {\text{S}}} }}$$
The shear force of a cantilever beam of length $$l$$ carrying a uniformly distributed load of w per unit length is __________ at the fixed end.
A Zero
B $$\frac{{{\text{w}}l}}{4}$$
C $$\frac{{{\text{w}}l}}{2}$$
D $${\text{w}}l$$
The bending moment of a cantilever beam of length '$$l$$' and carrying a uniformly distributed load of 'w' per unit length is __________ at the fixed end.
A $$\frac{{{\text{w}}l}}{4}$$
B $$\frac{{{\text{w}}l}}{2}$$
C $${\text{w}}l$$
D $$\frac{{{\text{w}}{l^2}}}{2}$$
The shear force diagram of a cantilever beam of length ‘l’ and carrying a uniformly distributed load of w per unit length will be
A A right angled triangle
B An isosceles triangle
C An equilateral triangle
D A rectangle
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies
A Less than the left half span
B Whole of left half span
C More than the left half span
D Whole span
A cantilever beam of length L carries a gradually varying load form zero at free and w per unit length at the fixed end. The maximum deflection lies at
A free end
B fixed end
C L/3 sloping side
D none of these
The maximum deflection of a fixed beam of length '$$l$$' carrying a total load 'W' uniformly distributed over the whole length is
A $$\frac{{{\text{W}}{l^3}}}{{48{\text{E}}I}}$$
B $$\frac{{{\text{W}}{l^3}}}{{96{\text{E}}I}}$$
C $$\frac{{{\text{W}}{l^3}}}{{192{\text{E}}I}}$$
D $$\frac{{{\text{W}}{l^3}}}{{384{\text{E}}I}}$$
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times

Next steps