Related Questions

The shear force of a cantilever beam of length $$l$$ and carrying a gradually varying load from zero at the free end and w per unit length at the fixed end is _________ at the fixed end.
A Zero
B $$\frac{{{\text{w}}l}}{4}$$
C $$\frac{{{\text{w}}l}}{2}$$
D $${\text{w}}l$$
The bending moment of a cantilever beam of length '$$l$$' and carrying a uniformly distributed load of 'w' per unit length is __________ at the fixed end.
A $$\frac{{{\text{w}}l}}{4}$$
B $$\frac{{{\text{w}}l}}{2}$$
C $${\text{w}}l$$
D $$\frac{{{\text{w}}{l^2}}}{2}$$
The shear force diagram of a cantilever beam of length ‘l’ and carrying a uniformly distributed load of w per unit length will be
A A right angled triangle
B An isosceles triangle
C An equilateral triangle
D A rectangle
The shear force diagram for a cantilever beam of length l and carrying a gradually varying load from zero at free end and w per unit length at the fixed end is a
A Horizontal straight line
B Vertical straight line
C Inclined line
D Parabolic curve
The bending moment of a cantilever beam of length $$l$$ and carrying a gradually varying load from zero at free end and w per unit length at the fixed end is ________ at the fixed end.
A $$\frac{{{\text{w}}l}}{2}$$
B $${\text{w}}l$$
C $$\frac{{{\text{w}}{l^2}}}{2}$$
D $$\frac{{{\text{w}}{l^2}}}{6}$$
The shear force at the ends of a simply supported beam carrying a uniformly distributed load of w per unit length is
A Zero at its both ends
B $${\text{w}}l$$ at one end and $$ - {\text{w}}l$$  at the other end
C $$\frac{{{\text{w}}l}}{2}$$ at one end and $$ - \frac{{{\text{w}}l}}{2}$$  at the other end
D $$\frac{{{\text{w}}{l^2}}}{2}$$ at one end and $$ - \frac{{{\text{w}}{l^2}}}{2}$$  at the other end
The shear force diagram for a simply supported beam carrying a uniformly distributed load of w per unit length, consists of
A One right angled triangle
B Two right angled triangles
C One equilateral triangle
D Two equilateral triangles
The shear force in the center of a simply supported beam carrying a uniformly distributed load of ‘w’ per unit length, is
A Zero
B $$\frac{{{\text{w}}{l^2}}}{2}$$
C $$\frac{{{\text{w}}{l^2}}}{4}$$
D $$\frac{{{\text{w}}{l^2}}}{8}$$
The maximum deflection of a cantilever beam of length '$$l$$' with a uniformly distributed load of 'w' per unit length is (where W = w$$l$$)
A $$\frac{{{\text{W}}{l^3}}}{{3{\text{E}}I}}$$
B $$\frac{{{\text{W}}{l^3}}}{{8{\text{E}}I}}$$
C $$\frac{{{\text{W}}{l^3}}}{{16{\text{E}}I}}$$
D $$\frac{{{\text{W}}{l^3}}}{{48{\text{E}}I}}$$
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$

Next steps