Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

If u (x, y, z, t) = f(x + iβy - vt) + g(x - iβy - vt), where f and g are arbitrary and twice differentiable functions, is a solution of the wave equation $$\frac{{\partial {u^2}}}{{\partial {x^2}}} = \frac{{{\partial ^2}u}}{{\partial {y^2}}} = \frac{1}{{{c^2}}}\frac{{{\partial ^2}u}}{{\partial {t^2}}}$$     then β is
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
In a full journal bearing, the angle of contact of the bearing with the journal is
In the following sentence, a part of the sentence is underlined. Below are given alternatives to the underlined part, which may improve the sentence. Choose the correct alternative in case no improvement is needed, choose the alternative that indicates ''No Improvement.'' Here are the journal article for the assignment. A. is the journal article B. is the journal articles C. these are the journal article
The highest pressure gas of a mixture has partial pressure p, the partial pressure of other gases decreases by factor of 2n-1, the partial pressure of second gases decreases by a factor of 2, partial pressure of third gas increases by 4, and so on, if the total pressure of gas mixture is 31p/16, how many gases are present in the mixture?
The equation relating E, P, V and T which is true for all substanes under all conditions is given by $${\left( {\frac{{\partial {\text{E}}}}{{\partial {\text{V}}}}} \right)_{\text{T}}} = {\text{T}} \cdot {\left( {\frac{{\partial {\text{P}}}}{{\partial {\text{T}}}}} \right)_{\text{H}}} - {\text{P}}{\text{.}}$$      This equation is called the
On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line $${\left( {\frac{{\partial {\text{P}}}}{{\partial {\text{V}}}}} \right)_{\text{S}}}$$  and the slope of the reversible isothermal line $${\left( {\frac{{\partial {\text{P}}}}{{\partial {\text{V}}}}} \right)_{\text{T}}}$$  are related as (where, $${\text{y}} = \frac{{{{\text{C}}_{\text{p}}}}}{{{{\text{C}}_{\text{v}}}}}$$  )
Maxwell equation $${\left( {\frac{{\partial P}}{{\partial T}}} \right)_V} = {\left( {\frac{{\partial S}}{{\partial V}}} \right)_T}$$     is produced from which of the following equation
The solution of initial value problem; $$\frac{{\partial {\text{u}}}}{{\partial {\text{x}}}} = 2\frac{{\partial {\text{u}}}}{{\partial {\text{t}}}} + {\text{u,}}$$   where u(x, 0) = 6e-3x is
Let $${\text{f}}\left( {{\text{x, y}}} \right) = \frac{{{\text{a}}{{\text{x}}^2} + {\text{b}}{{\text{y}}^2}}}{{{\text{xy}}}},$$     where a and b are constants. If $$\frac{{\partial {\text{f}}}}{{\partial {\text{x}}}} = \frac{{\partial {\text{f}}}}{{\partial {\text{y}}}}$$   at x = 1 and y = 2, then the relation between a and b is