Related Questions

Two shafts A and B are made of the same material. The diameter of shaft A is twice as that of shaft B. The power transmitted by the shaft A will be __________ of shaft B.
A Twice
B Four times
C Eight times
D Sixteen times
The usual proportion for the width of key is (where d = Diameter of shaft or diameter of hole in the hub)
A $$\frac{{\text{d}}}{8}$$
B $$\frac{{\text{d}}}{6}$$
C $$\frac{{\text{d}}}{4}$$
D $$\frac{{\text{d}}}{2}$$
Two shafts ‘A’ and ‘B’ under pure torsion are of identical length and identical weight and are made of the same material. The shaft ‘A’ is solid and the shaft ‘B’ is hollow. We can say that
A Shaft B is better than shaft A
B Shaft A is better than shaft B
C Both the shafts are equally good
D None of these
The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
A hollow shaft will transmit a __________ torque than a solid shaft of the same mass and same material.
A Smaller
B Greater
C Medium
D None of these
If a page length and width is 2 meter and 2 meter. If you cut in length 10 centimeter and width 2 centimeter. Then how many pices you get?
A 2,000
B 200
C 20
D 20,000
ABCD is a rectangle . If its lengthis decreased by 5 meter and the width is increased by 3 mete3r, the area de3creases by 2 meter, the area inceases by 67 square meter, What is the width width of ABCD?
A 9 meter
B 17 meter
C 18 meter
D 22 meter
Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be
A $$\frac{1}{8}$$
B $$\frac{1}{4}$$
C 2
D 4

Next steps