Related Questions

The radial distance of a tooth from the pitch circle to the bottom of the tooth is called
A dedendum
B addendum
C clearance
D working depth
The radial distance of a tooth from the pitch circle to the top of the tooth is called
A Addendum
B Dedendum
C Clearance
D Working depth
Read the following passage carefully and then choose the right word to complete the sentence that follows. Rockets are very expensive as it can be used only once. Appled scientists have therefore develped a reusable space craft called a space shuttle which takes off like a rocket; however, does no get destroyed as it returns to earth. It can also be used to lunch satellired into space, retrieve them from space if any repairing os required and allow around 8 scientists to crryout experiments in space. The space shuttle does not get.
A flattened
B enlarged
C ruined
D developed
The difference between the radio of bigger difference between circle and smaller circle is 14 and the difference between their sareas is 1056 cm2 . Radius of the smaller circle is .
A 7 cm
B 5 cm
C 9 cm
D 3 cm
In a plain milling cutter, the chip space between the back of one tooth and the face of the next tooth is called
A Face
B Fillet
C Gash
D Land
When the addenda on pinion and wheel is such that the path of approach and path of recess are half of their maximum possible values, then the length of the path of contact is given by (where r = Pitch circle radius of pinion, R = Pitch circle radius of wheel and $$\varphi $$ = Pressure angle)
A $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\cos \varphi }}{2}$$
B $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\sin \varphi }}{2}$$
C $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\cos \varphi }}{2}$$
D $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\sin \varphi }}{2}$$
The difference between the radii of bigger circle and smaller circle is 14 cm and the difference between their areas is 1056 cm2. Radius of the smaller circle is:
A 7cm
B 5cm
C 9cm
D 3cm
The difference between the radii of bigger circle and smaller circle is 14 cm and the difference between their areas is 1056 cm2 . Radius of the smaller circle is _
A 7 cm
B 5 cm
C 9 cm
D 3 cm
The flank of the tooth is the surface of the tooth __________ the pitch surface.
A Above
B Below
C At
D None of these
Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water coloumn in case of mercury-water, differential manometer is equal to (where, H = difference in height of mercury column in mm).
A H
B 12.6 H
C 13.6 H
D 14.6 H

Next steps