Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Which of the following is correct with regarding the formation of Nitrogen? I. Nitrogen is obtained by liquefaction and fractional distillation of air. II. Nitrogen is obtained by reacting an aqueous solution of Ammonium chloride with Sodium Nitrite. III. Decomposition of Sodium or Barium Azide at high-temperature results in the formation of pure Nitrogen. IV Nitrogen is not soluble in water.
Solution of nitrogen in liquid iron may be assumed to follow Sievert's law. Nitrogen content of liquid iron. at 1873K in equilibrium with 1 atm pressure of nitrogen is measured as 0.044 (mass %). What will be the equilibrium nitrogen content in liquid iron (mass%), if nitrogen pressure is reduced to 0.25 atm?
Consider the following statements regarding the nitrogen cycle: 1. Nitrogen in gaseous form can be used by all living organisms. 2. Nitrogen can be fixed in the atmosphere by lightning and cosmic radiation. 3. Bacteria can convert nitrates into free nitrogen. Which of the statements given above is/are correct?
Consider the following statements: 1. Ammonia nitrogen is a measure of nitrogen present as ammonium hydroxide and ammonium salts. It will progressively decrease as sewage gets treated. 2. Organic nitrogen is the total nitrogenous matter in sewages excepting that present as ammonia nitrogen, nitrites and nitrates. It becomes ammonia in anaerobic decomposition and nitrites or nitrates in aerobic decomposition. Which of the above statements is/are correct?
In order to prepare Lithium nitride, air is passed gently over a reactor. Suppose that Nitrogen diffuse to a length 5cm before getting reacted with Lithium. Nitrogen reacts with lithium quickly so that partial pressure of Nitrogen at that point is 0. Reactor is a cylinder of length 10cm and diameter 2cm. Assume air to be a mixture of Nitrogen and Oxygen only. The temperature is 298K and total pressure 1atm. Diffusivity of N2 in O2 is 2*10-5m2/s. Calculate the Molar flux (mol/m2.s) of N2 at a distance of 2.5cm from the top with respect to an observer moving with twice the mass average velocity a direction towards the liquid surface. (R=8.205*10-5m3atmK-1mol-1). Assume z=0 at the top of the reactor.
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate F combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate D and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate P, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate F combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate D and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate 10 Kg/min, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 100% nitrogen at the rate 10 Kg/min combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate 20 Kg/min and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate 30 Kg/min the product formed contains 20% acetic acid, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate 10 Kg/min combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate 20 Kg/min and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate P, what is the percentage of nitrogen in product?
The total Nitrogen load = (soluble organic nitrogen and ammonia from incoming wastewater) + (nitrogen from Return Activated Sludge) + (nitrogen from recirculation).