Related Questions

A bus picks up a group of tourists at a hotel. The sightseeing bus travels 2 blocks north, 2 blocks east. I block south, 2 blocks east, and 1 block south. Where is the bus in relation to the hotel?
A 2 blocks north
B 1 block west
C 3 blocks south
D 4 blocks east
How many blocks away will Fred be from his starting p;ace if he travels two blocks north , then three blocks east, and then two blocks south?
A Four
B Two
C Three
D Zero
How many blocks away will Fred be from his starting place if he travels two blocks north, then three blocks east and then two blocks south?
A Four
B Two
C Three
D Zero
In a band and block brake, the ratio of tensions on tight side and slack side of the band is (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the center of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = \mu \theta {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
In a band and block brake, the ratio of tensions on the tight and slack sides of band is given by (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the centre of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_{\text{2}}}}} = \mu \theta \times {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
If the length of a edge of cube X is thrice the length of an edge of cube Y, What is the ration of the volume of cube Y to the volume of cube X?
A 1/2
B 1/4
C 1/6
D 1/8
Most architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in _________.
A Block vaults
B Block libraries
C Block books
D Block references
If an aluminium pattern made from a wooden master pattern is to be used for grey iron castings, then the shrinkage allowance allowed on the wooden pattern should be
A 10 mm/m
B 16 mm/m
C 20 mm/m
D 26 mm/m
When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.
A Zero
B Center line
C Hatch
D Hidden line
Why do two ice blocks join to form one block when pressed together?
A Melting point of ice is lowered with increase in pressure
B Melting point of ice increases with increase in pressure
C Melting point of ice remains unchanged with increase in pressure
D Melting point of ice is 0°C

Next steps