Related Questions

Find the resistance (in mega Ω) of a wire of length 20m, cross sectional area 1 cm2 and made of a material of resistivity 200 Ωm.
Two wires have the same material and have the same volume. However wire 1 had cross sectional area A and wire 2 has cross sectional area 3A. If the length of wire 1 increases by ∆x on applying force F, how much force is needed to stretch wire 2 by the same amount?
Find the resistance (in mega ohm) of a wire of length 8 m, cross sectional area 2 sq.cm and made of a material of resistivity 120 ohm m.
Find the resistance (in mega Ω) of a wire of length 10 m, cross sectional area 1 cm2 and made of a material of resistivity 100 Ωm.
Find the resistance (in mega O) of a wire of length 10 m, cross sectional area 1 cm2 and made of a material of resistivity 100 Ohm.
In the gate area for non-pressurized casting gating ratio a:b:c? (gating ratio = a: b: c where, a = cross-sectional area of sprue, b: cross-sectional area of runner, c = total cross-sectional area of ingates).
A telephone switchboard 100 pair cable can be made up with either enameled wire or tinned wire. There will be 400 soldered connections. The cost of soldering a connection on the enameled wire will be P 1.65 on the tinned wire, it will be P 1.15. A 100- pair cable made up with enameled wire cost P 0.55 per linear foot and those made up of tinned wire cost P 0.75 per linear foot. Determine the length of cable run in feet so that the cost of each installation would be the same.
A wire having an area of cross section = 10sqm and another wire having an area of cross section= 15sqm, have the same length and are made up of the same material. Which wire has more resistance?
Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be
A wire of length 2m and another wire of length 5m are made up of the same material and have the same area of cross section, which wire has higher resistance?