Related Questions

Which of the following statements are true/false?
1. No child shall be employed or permitted to work, in any factory for more than four and a half hours in any day and during the night.
2. A child who has completed his eighteenth year or an adolescent shall not be required or allowed to work in any factory unless he has a certificate of fitness is granted in the custody of the manager of the factory.
3. The period of work of all children employed in a factory shall be limited to two shifts which shall not overlap or spread over more than five hours each.
4. No female child shall be required or allowed to work in any factory except between 8 A.M. and 7 P.M.
There are 1250 cars in a factory. The factory produces 5 cars hourly. If the sales of the factory are 50 cars per day, what will be the sale percentage to the total cars held by the factory after 5 days. It is known that the factory runs 8 hours daily.
Principle: A person who voluntarily takes a decision to do something after appreciating the risk involved in such act and then receives an injury, will not be entitled to get any compensation.
Facts: 'X', an electrical engineer, was invited by his friend 'Y', to the factory where he was employed. While they were in the factory, 'Q' a worker in the factory informed 'Y' about some short-circuit in the power room. Hearing this, 'Y' asked 'X' to stay in the office room and rushed to the power room. 'X' however, decided to follow 'Y'. 'X' noticed that if the power supply through a particular electric line could be disconnected, the electrical leakage could be stopped which would prevent further damage. Suddenly 'X' decided to pullout the wire manually even though it was risky. This resulted in a blast in which both 'X' and 'Y' got injured. 'X' had to spend Rs. 1 lakh at the hospital for his treatment. 'X' wants to file a suit for compensation from the management of the factory. Will he succeed?
Which of the following statements are true/false?
1. Day is a period of twenty fours beginning from midnight.
2. A child who has completed his fourteenth year or an adolescent shall not be required or allowed to work in any factory unless he has a certificate of fitness is granted in the custody of the manager of the factory.
3. All doors and window frames and other wooden or metallic framework and shutters of a factory should be kept painted or varnished and the painting or varnishing shall be carried out atleast once in every period of four years.
4. The state government has the power to direct the Director General of Factory Advice Service and Labour Institutes or any institution specialised in matters relating to standards of safety in hazardous processes.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame