Related Questions

The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)
A $$\frac{1}{2}$$μWR
B $$\frac{2}{3}$$μWR
C $$\frac{3}{4}$$μWR
D μWR
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.
A 10 times
B 5 times
C 15 times
D 20 times
If p = bearing pressure on projected bearing area, Z = absolute viscosity of lubricant and N = speed of journal, then the bearing characteristic number is given by
A $$\frac{{{\text{ZN}}}}{{\text{p}}}$$
B $$\frac{{\text{p}}}{{{\text{ZN}}}}$$
C $$\frac{{\text{Z}}}{{{\text{pN}}}}$$
D $$\frac{{\text{N}}}{{{\text{Zp}}}}$$
Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg.
A 1000
B 4000
C 6000
D 8000
Which of the following types of coal represents the first stage of formation of coal?
A Anthracite
B Lignite
C Peat
D Bituminous
The property of a bearing material which has the ability to accommodate shaft deflections and bearing inaccuracies by plastic deformation without excessive wear and heating, is known as
A Bondability
B Embeddability
C Comformability
D Fatigue strength
In a boundary lubricated bearing, there is a __________ of lubricant between the journal and the bearing.
A Thick film
B Thin film
C Either A or B
D None of these
In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be
A less than 300 mm
B between 300 mm and 750 mm
C between 750 mm and 1 m
D greater than 1 m
The type of bearing plate used in all joints and on curves to give better bearing area to the rails is
A flat mild steel bearing plate
B mild steel canted bearing plate
C cast iron anti creep bearing plate
D none of the above
In a ball bearing, ball and bearing forms a
A Turning pair
B Rolling pair
C Screw pair
D Spherical pair

Next steps