A parallel plate capacitor is being discharged. What is the direction of the energy flow in terms of the Poynting vector in the space between the plates?
Electromagnetic Theory mcq question image

A parallel plate capacitor is being discharged. What is the direction of the energy flow in terms of the Poynting vector in the space between the plates?
Electromagnetic Theory mcq question image Correct Answer Radially outward $$\left( {{\bf{\hat r}}} \right)$$

Bissoy MCQ

Related Questions

A parallel-plate capacitor of capacitance C1is made using two gold plates. Another parallel-plate capacitor of capacitance C2is made using two aluminium plates with same plate separation, and all the four plates are of same area. If gand aPare respectively the electrical resistivities of gold and aluminium, then which one of the following relations is correct?
A parallel-plate capacitor of capacitance C1 is made using two gold plates. Another parallel-plate capacitor of capacitance C2 is made using two aluminium plates with same plate separation, and all the four plates are of same area. If rg and ra are respectively the electrical resistivities of gold and aluminium, then which one of the following relations is correct?
A parallel plate capacitor has an electrode area of 1000 mm2, with a spacing of 0.1 mm between the electrodes. The dielectric between the plates is air with a permittivity of 8.85∗10-12 F/m. The charge on the capacitor is 100 v. The stored energy in the capacitor is ____________
Consider a conducting loop of radius a and total loop resistance R placed in a region with a magnetic field B thereby enclosing a flux $${\phi _0}$$ . The loop is connected to an electronic circuit as shown, the capacitor being initially uncharged.
Electromagnetic Theory mcq question image
If the loop is pulled out of the region of the magnetic field at a constant speed u, the final output voltage Vout is independent of
If a parallel plate capacitor of plate area 2m2 and plate separation 1m store the charge of 1.77*10-11 C. What is the voltage across the capacitor?
Poynting vector gives the energy flow per unit area per unit time through a cross-sectional area along the direction of propagation of the wave.
The average drag coefficient for turbulent boundary layer flow past a thin plate is given by C f = 0.455/ (log 10 R el) 2.58 Where R el is the Reynolds number based on plate length. A plate 50 cm wide and 5 m long is kept parallel to the flow of water with free stream velocity 3 m/s. Calculate the drag force on both sides of the plate. For water, kinematic viscosity = 0.01 stokes
In a clapp oscillator with three capacitor C1, C2, C3, C1 is used as upper capacitor in voltage divider, C2 is used as lower capacitor in voltage divider and C3 is the third capacitor. For perfect operation which of these capacitor should have minimum value?
A metal parallel plate capacitor has 100mm diameter and the distance between the plates is 1mm. The capacitor is placed in air. Calculate the force on each plate if the potential difference between the plates is 1kV.
A metal parallel plate capacitor has 100mm diameter and the distance between the plates is ‘a’ mm. The capacitor is placed in air. Force on each plate is 0.035N and the potential difference between the plates is 1kV. Find ‘a’.