Related Questions

The change in length due to a tensile or compressive force acting on a body is given by (where P = Tensile or compressive force acting on the body, $$l$$ = Original length of the body, A = Cross-sectional area of the body and E = Young's modulus for the material of the body)
A $$\frac{{{\text{P}}l{\text{A}}}}{{\text{E}}}$$
B $$\frac{{{\text{P}}l}}{{{\text{AE}}}}$$
C $$\frac{{\text{E}}}{{{\text{P}}l{\text{A}}}}$$
D $$\frac{{{\text{AE}}}}{{{\text{P}}l}}$$
Which is the most thermally efficient furnace?
A Reheating furnace
B Reverberatory furnace
C Rotary kilns
D Boiler furnace
The Nusselt number for fully developed (both thermally and hydrodynamically) laminar flow through a circular pipe, where the wall heat flux is constant, is
A 2.36
B 4.36
C 120.36
D Dependent on NRe only
The Nusselt number for fully developed (both thermally and hydrodynamically) laminar flow through a circular pipe whose surface temperature remains constant is
A 1.66
B 88.66
C 3.66
D Dependent on NRe only
The natural frequency of free longitudinal vibrations is equal to (where m = Mass of the body, s = Stiffness of the body and $$\delta $$ = Static deflection of the body)
A $$\frac{1}{{2\pi }} \times \sqrt {\frac{{\text{s}}}{{\text{m}}}} $$
B $$\frac{1}{{2\pi }} \times \sqrt {\frac{{\text{g}}}{\delta }} $$
C $$\frac{{0.4985}}{{\sqrt \delta }}$$
D Any one of these
If a given force (or a given system of forces) acting on a body __________ the position of the body, but keeps it in equilibrium, then its effect is to produce internal stress in the body.
A Change
B Does not change
C Changes periodically
D None of these
If ‘P’ is the force acting on the body, ‘m’ is the mass of the body and ‘a’ is the acceleration of the body, then according to Newton's second law of motion,
A P + ma = 0
B P - ma = 0
C P × ma = 0
D $$\frac{{\text{P}}}{{{\text{ma}}}} = 0$$
A spherical body is symmetrical about its perpendicular axis. According to Routh's rule, the moment of inertia of a body about an axis passing through its centre of gravity is (where, M = Mass of the body and S = Sum of the squares of the two semi-axes.)
A $$\frac{{{\text{MS}}}}{3}$$
B $$\frac{{{\text{MS}}}}{4}$$
C $$\frac{{{\text{MS}}}}{5}$$
D None of these
Mass moment of inertia of a thin rod about its one end is ___________ the mass moment of inertia of the same rod about its mid-point
A Same as
B Twice
C Thrice
D Four times
The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability ?
A Lead
B Copper
C Aluminium
D Wrought iron

Next steps