Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In counterfort type retaining walls
i) the vertical slab is designed as a continuous slab
ii) the heel slab is designed as a continuous slab
iii) the vertical slab is designed as a cantilever
iv) the heel slab is designed as a cantilever
The correct answer is
Which of the following statements are correct regarding Westergard’s concept for temperature stresses? 1. During the day, the top of the pavement slab gets heated under the sunlight when the bottom of the slab becomes hot 2. During summer season as the mean temperature of the slab increases, the concrete pavement expands towards the expansion joints 3. Due to frictional force at the interface, compressive stress is developed at the bottom of the slab as it tends to expand.
A plane slab of thickness 60 cm is made of a material of thermal conductivity k = 17.45 W/m K. Let us assume that one side of the slab absorbs a net amount of radiant energy at the rate q = 530.5 watt/m2. If the other face of the slab is at a constant temperature t2 = 38 degree Celsius. Comment on the temperature with respect to the slab?
“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
Consider the following statements: 1. If x is directly proportional to z and y is directly proportional to z, then (x2 - y2) is directly proportional to z2. 2. If x is inversely proportional to z and y is inversely proportional to z, then (xy) is inversely proportional to z2. Which of the above statements is/are correct?
In counterfort type retaining wallsi) the vertical slab is designed as a continuous slabii) the heel slab is designed as a continuous slabiii) the vertical slab is designed as a cantileveriv) the heel slab is designed as a cantileverThe correct answer is
Thickness of 8 tyres L, M, N, O, P, Q, R and S is compared. Thickness of no two tyres is same. Thickness of N is more than L but less than 6 tyres. Thickness of O is more than M but less than Q. Thickness of P is less than only two tyres. Thickness of Q is not more than P. Which of the following statement is not correct?
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
Consider a slab of thickness δ with one side (x = 0) insulated and other side (x = δ) maintained at constant temperature. The rate of uniform heat generation within the slab is q g W/m3. Presuming that the heat conduction is in steady state and one dimensional along x direction, the maximum temperature in the slab would occur at x equal