Bissoy.com
Doctors Medicines MCQs Q&A

In a surface mine, sound pressure level at a location generated by operation of a dozer and a drill respectively are 80 dBA and 60 dBA, when operated independently. The sound pressure generated by the dozer compared to the drill is higher by a factor of

In a surface mine, sound pressure level at a location generated by operation of a dozer and a drill respectively are 80 dBA and 60 dBA, when operated independently. The sound pressure generated by the dozer compared to the drill is higher by a factor of Correct Answer 10

Related Questions

At an Electronic Data processing unit, five out of the eight program sets P,Q,R,S,T,U,V and W are to be operated daily. On any one day, except for the first day of a month, only three of the program sets must be the ones that were operated on the previous day. The program operating must also satisfy the following conditions: 1. If program P is to be operated on a day, V can’t be operated on that day. 2. If Q is to be operated on a day, T must be one of the programs to be operated after Q. 3. If R is to be operated on a day, V must be one of the programs to be operated after R. 4. The last program to be operated on any day must be either S or U. If the program sets R and W are to be operated on the first day, which of the following could be the other program on that day?
A pumping station in a mine has 4 pumps, P1, P2, P3 and P4 which are connected functionally in parallel configuration as shown in the figure. The individual reliability of the pumps P1, P2, P3 and P4 are 0.80, 0.90, 0.85 and 0.95 respectively. For an effective dewatering operation in the mine denoting system success, at least three pumps should be in operation. The reliability of the system is
Mine System Engineering mcq question image
A mine ventilation system consists of two splits A and B with resistances of 0.8 Ns2m-8 and 3.2 Ns2m-8, respectively as shown in figure. Trunk airways have resistance of 0.2 Ns2m-8. The main mine fan is generating pressure of 500 Pa.
Mine Ventilation mcq question image
The air quantities in m3/s circulated in the splits A and B respectively are
A mine ventilation system consists of two splits A and B with resistances of 0.8 Ns2m-8 and 3.2 Ns2m-8, respectively as shown in figure. Trunk airways have resistance of 0.2 Ns2m-8. The main mine fan is generating pressure of 500 Pa.
Mine Ventilation mcq question image
The flows in the two splits are equalized by placing a booster fan in split B. Assume that the fan pressure does not change after installation of the booster fan. The size of the booster fan in Pa is
Pressure characteristic of a mine fan is given by. P = -0.06Q2 + 400. where P is the pressure in Pa and Q is the quantity in m3/s. The resistance of the mine is 0.19 Ns2/m8. An identical fan is installed in the mine to operate in series with the existing fan. The new mine quantity in m3/s is
Four mines A, B, C and D are located along a road as shown with production in Mt per year 1, 2, 1 and 3 respectively. In order to handle total coal produced. the ideal distance of a coal washery along the road from the mine A in Km is
Mine System Engineering mcq question image
The figure shows PV (pressure-volume) diagram of a mine ventilated by both natural means and an exhaust fan. The total ventilation energy is represented by
Mine Ventilation mcq question image
The main fan operating point of a ventilation system is shown in the figure below. If an NPV of 200 Pa assists the ventilation system, the resultant pressure (Pa) and quantity (m3) generated by the
Mine Ventilation mcq question image
Pipes P and Q fill a cistern in 12 minutes when operated together, Q and R fill it in 20 minutes when operated together and P and R fill it in 15 minutes when operated together. In how many minutes can all 3 pipes fill the cistern if operated together?
In the following question, sentences of a paragraph have been jumbled and labelled as A, B, C and D. You are required to rearrange the jumbled sentences of the paragraph and mark your response accordingly by selecting the correct option. A: As the source continues to vibrate the medium, the vibrations propagate away from the source at the speed of sound, thus forming the sound wave. B: The sound source creates vibrations in the surrounding medium.  C: The sound waves are generated by a sound source, such as the vibrating diaphragm of a stereo speaker. D: Sound can propagate through a medium such as air, water, and solids as longitudinal waves and also as a transverse wave in solids.