Related Questions

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
A 10 mm
B 15 mm
C 20 mm
D 25 mm
The force due to wind load acting on a tall vessel depends upon its
A Shape
B Outside diameter
C Height
D All of the above
There are two domains on your network. The DESIGN domain trusts the SALES domain. A color printer is shared in the DESIGN domain, and print permissions have been granted to the Domain Users and Domain Guests groups in the DESIGN domain. The Guest account has been enabled in the DESIGN domain. User John Y logs on using his account in the SALES domain. What must you do to allow JohnY to access the printer?
A Make JohnY a member of the DESIGN Domain Guests group
B Make JohnY a member of the DESIGN Domain Users group
C Do nothing. JohnY can access the printer now
D JohnY cannot access the printer with this configuration
E None of the above
When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
A Is at the maximum distance from CG of the rivet group
B Is at the minimum distance from CG of the rivet group
C Gives the maximum angle between the two forces Fa and Fm
D Gives the minimum angle between the two forces Fa and Fm
When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as
A Steady flow
B Turbulent flow
C Vortex flow
D Uniform flow
Two glasses of equal volume respectively are half and three - fourths filled with milk. They are then filled to brim by adding water. Their contents are then poured into another vessel. What will be the ratio of milk to water in this vessel ?
A 1 : 3
B 2 : 3
C 3 : 2
D 5 : 3
The higher the wind speed and the longer the fetch or distance of open water across which the wind blows and waves travel, the ____ waves and the ____ energy they process.
A larger, more
B larger, less
C smaller, more
D smaller, less
For the buildings having a low permeability, the internal wind pressure acting normal to the wall and roof surfaces is taken as (where p is basic wind pressure)
A Zero
B ±0.2p
C ±0.5p
D ±0.7p
The relation between intensity of wind pressure P and velocity of wind V is taken as
A $${\text{P}} \propto {\text{V}}$$
B $${\text{P}} \propto {{\text{V}}^2}$$
C $${\text{P}} \propto \frac{1}{{\text{V}}}$$
D $${\text{P}} \propto {{\text{V}}^{\frac{1}{2}}}$$
The landing and takeoff of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding
A 10°
B 20°
C 30°
D 40°

Next steps