Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

When there is no recirculation of sewage, then recirculation factor is
Consider the following statements for an induction furnace: 1. High-frequency current is generally used for the furnace working. 2. There is less loss of alloying elements due to oxidation. 3. Pronounced stirring action of molten metal occurs inside the furnace. 4. Slag cover is essential for the efficient working of the furnace. Which of the above statements are correct?
Hot gases from a furnace are entering at the base of a 30m high tubular vertical chimney at 600°C. The density of air and furnace gases at respective temperatures are 1.165 and 0.405 kgm-3 respectively. The static draft produced by the chimney is . . . . . . . . Pa.
Statement: Resonance is a special case of forced vibration in which the nature and frequency of vibration of the body are the same as the impressed frequency and the amplitude of forced vibration, is maximum. Reason: The amplitude of forced vibrations of a body increases with an increase in the frequency of the externally impressed periodic force.
Various gases present in air are oxygen, nitrogen, argon and neon. The boiling points of these gases are –183, –196, –186 and –246 degrees Celsius, respectively. These gases are separated from each other by the process of fractional distillation. Which of the following statements about the order in which these gases get separated is correct?
In forced recirculation type boiler,
Which of the following facts is/are correct about the blast furnace in Iron metallurgy? Limestone is added to the blast furnace to reduce the iron oxide in the ore to iron. Coke is added to the blast furnace to physically separate iron from other impurities. Carbon dioxide reduces to carbon monoxide.
Two long rods A and B of the same diameter have thermal conductivities k and 4k and have one of their end inserted into a furnace at 400 K. At 9.5 m away section from the furnace, the temperature of rod B is120 degree Celsius. So find out at what end from the furnace end, the same temperature would be reached in the rod A?
A cylindrical stainless steel (k = 25 W/m K) ingot, 10 cm in diameter and 25 cm long, passes through a heat treatment furnace which is 5 meter in length. The initial ingot temperature is 90 degree Celsius, the furnace gas is at 1260 degree Celsius and the combined radiant and convective surface coefficient is 100 W/m2 K. Determine the maximum speed with which the ingot moves through the furnace if it must attain 830 degree Celsius temperature. Take thermal diffusivity as 0.45 * 10 -5 m2/s
Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percent furnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C.