Related Questions

A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest.
A Equal to
B Less than
C More than
D None of these
In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir.
A Equal to
B One-third
C Two-third
D Three-fourth
A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest.
A Equal to
B Less than
C More than
D None of these
3/4th of square were taken to form shape A and the rest was made to form shape B. Shape A was divided into four equal squares (Shape C), what will be the ratio of the one shape C to one shape B.
A 1:4
B 3:16
C 1:2
D 3:4
When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as
A Narrow-crested weir
B Broad-crested weir
C Ogee weir
D Submerged weir
The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is
A 0.1
B 0.55
C 0.95
D 1.85
The critical depth for a channel is given by (where q = Unit discharge (discharge per unit width) through the channel)
A $${\left( {\frac{{\text{q}}}{{\text{g}}}} \right)^{\frac{1}{2}}}$$
B $${\left( {\frac{{{{\text{q}}^2}}}{{\text{g}}}} \right)^{\frac{1}{3}}}$$
C $${\left( {\frac{{{{\text{q}}^3}}}{{\text{g}}}} \right)^{\frac{1}{4}}}$$
D $${\left( {\frac{{{{\text{q}}^4}}}{{\text{g}}}} \right)^{\frac{1}{5}}}$$
The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called
A proportionality
B flexibility
C setting
D sensitivity
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. If Z is open, which of the following must be true?
A S is open
B T is open
C U is open
D y is open
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. If R is closed and U is open, which of the following must be true?
A S is open
B T is open
C T is closed
D Y is closed

Next steps