Related Questions

Lead is poured into the joint between two pipes. These pipes may be made of
A Cast iron
B Vitrified clay
C Asbestos cement
D Concrete
Lead is poured into the joint between two __________ pipes.
A Mild steel
B Concrete
C Cast iron
D Asbestos cement
Lead is poured into the joint between two- __________ pipes.
A Mild steel
B Concrete
C Cast iron
D Asbestos cement
Equal amounts of water were poured into two empty jars of different capacities, which made one jar 1/4 full and the other jar 1/3 full. If the water in the jar with the lesser capacity is then poured into the jar with the greater capacity, what fraction of the larger jar will be filled with water?
A 1/3
B 1/4
C 1/2
D 1/5
Four liters of milk are to be poured into a 2 liter bottle and a 4 liter bottle . If each bottle is to be filled to the same fraction of its capacity, how many liters of milk should be poured into the 4 liter bottle?
A 7/3
B 2/3
C 8/3
D 4/3
These types of pipes are generally connected with bell and spigot joints or flanged joints:
A Soil and waste
B Water and gas
C Water and steam
D Gas and soil
A tank is fitted with 8 pipes, some of them that fill the tank and others that are waste pipe meant to those that empty the tank can empty it in 6 hours. If all the pipes are kept open when the tank is full, it will take exactly 6 hours for the tank to empty. How many of these are these are fill pipes?
A 2
B 4
C 6
D 5
Equal amounts of water were proured into two empty jars of different capacities, which made one jar 1/4 full and the other jar 1/3 full . If the water in the with the lesser capacity is then poured into the jar the greater capacity, What fraction of the larger jar will be filled with water?
A 1/3
B 1/4
C 1/5
D 1/2
The drive-shafts are connected to the differential and wheel hubs through universal joints because the universal joints
A Absorb the vibrations transferred from the surface of the road
B Compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
C Absorb any difference in speed between the left and right wheels when the vehicle is turning
D None of the above
Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to
A $$\frac{1}{2}$$
B 1
C 2
D $$\frac{1}{4}$$

Next steps