Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Impeller & casing of centrifugal pump handling corrosive liquid and frequently running under cavitation condition is most prone to __________ corrosion.
Consider the 5 × 5 matrix \[{\text{A}} = \left[ {\begin{array}{*{20}{c}} 1&2&3&4&5 \\ 5&1&2&3&4 \\ 4&5&1&2&3 \\ 3&4&5&1&2 \\ 2&3&4&5&1 \end{array}} \right
Select from the alternatives that combination of numbers, which will form a meaningful word if given letters are arranged accordingly. \(\begin{matrix} \ \ \ \text{A} & \rm R & \rm W & \rm L & \rm E & \rm K \\\ \downarrow & \downarrow & \downarrow & \downarrow & \downarrow & \downarrow \\\ \ \ 1 & 2 & 3 & 4 & 5 & 6 \end{matrix}\)
Consider the following statements pertaining to centrifugal pumps: 1. The inlet to the impeller of a centrifugal pump is always axial, while the outlet may be radial or inclined. 2. The impeller may be shrouded on both sides with an eye at the center and vanes curved backward. 3. Impeller of double-entry type has a balanced radial thrust. 4. Un-shrouded and part-shrouded impeller are used only where high efficiency is unimportant. Which of these statements are correct?
Let A be an m × n matrix and Ban n × m matrix. It is given that determinant ($$I$$m + AB) = determinant ($$I$$n + BA), where $$I$$k is the k × k identity matrix. Using the above property, the determinant of the matrix given below is
\[\left[ {\begin{array}{*{20}{c}} 2&1&1&1 \\ 1&2&1&1 \\ 1&1&2&1 \\ 1&1&1&2 \end{array}} \right
Eigen values of the matrix \[\left[ {\begin{array}{*{20}{c}} 0&1&0&0 \\ 1&0&0&0 \\ 0&0&0&{ - 2i} \\ 0&0&{2i}&0 \end{array}} \right
In a coded language “ADETP” is coded as “$&$&&” and “DTPQUV” is coded as “&&&&$&”? What is the code word for “&&$$&$”?
Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases.
The impeller type electric fuel pump consists of a pump casing, a DC motor, an impeller, a relief valve, and a check valve.
A centrifugal pump which circulates a hot liquid metal at 500 degree Celsius is driven by a 3600 rpm electric motor. The motor is coupled to the pump impeller by a horizontal steel shaft of dia 25 mm. Let us assume the motor temperature as 60 degree Celsius with the ambient air at 25 degree Celsius, what length of shaft should be specified between the motor and the pump? It may be presumed that the thermal conductivity of the shaft material is 35W/m K and that the convective film coefficient between the steel shaft and the ambient air is 15.7W/square m K