Related Questions

The ratio of exit pressure to inlet pressure for maximum mass flow rate per unit area of steam through a nozzle when steam is initially dry saturated is
A 0.6
B 0.578
C 0.555
D 0.5457
The isentropic expansion of steam through nozzle for the steam initially superheated at inlet is approximated by equation
A pvls=C
B pv1126 = C
C pv1A = C
D pv = C
The critical pressure ratio for initially superheated steam is __________ as compared to initially dry saturated steam.
A More
B Less
C Same
D None of these
When the back pressure of a nozzle is below the designed value of pressure at exit of nozzle, the nozzle is said to be
A Choked
B Under-damping
C Over-damping
D None of these
The isentropic expansion of steam through nozzle for the steam initially dry saturated at inlet is approximated by equation.
A pv = C
B pv1A = C
C pv1i = C
D pv
The energy loss in flow through ven-turimeter is less than that through flow nozzle, because in case of a flow nozzle, the
A Length is shorter
B Throat diameter is more
C Sudden expansion of flow in the downstream occurs
D Distance between the throat and the inlet is more
In a steam engine, superheated steam from the boiler is fed into the steam chest at a pressure of
A 10 atmospheres
B 20 atmospheres
C 30 atmospheres
D 40 atmospheres
When the nozzle operates with the maximum mass flow, the nozzle is said to be
A Choked
B Under-damping
C Over-damping
D None of these
The variable required to be known in correlations used for estimating the horse power of a centrifugal gas compressor and hence its cost are P. Inlet pressure Q. Compressor rpm R. Delivery pressure S. Volumetric flow rate at inlet.
A P, Q and R
B P and R
C R and S
D P, R and S
A water tank with 64-gallon capacity is filled by pipe A and emptied by pipe B. If the rate of water flow through pipe A is 2 gallons per hour, how many gallons per hour should flow through pipe B so that when both pipes are open, the initially empty tank shold be full in exactly 96 hours?
A 3/8
B 4/3
C 2/3
D 8/3

Next steps