Related Questions

Which part of a motor needs maximum attention for maintenance?
A Frame
B Rearing
C Stator winding
D Rotor winding
If a particular application needs high speed and high starting torque, then which of the following motor will bepreferred ?
A Universal motor
B Shaded pole type motor
C Capacitor start motor
D Capacitor start and run motor
Size of a high speed motor as compared to low speed motor for the same H.P. will be
A Bigger
B Smaller
C Same
D Any of the above
a motor -cycle covers 40 Km with a speed of 20 km /hr. Find the speed of the motor -cycle for the next 40 km journey so that the average speed of the whole journey will be 30 km / hr.
A 70.0km /hr
B 52.5km /hr
C 60.0km/hr
D 60. 5 km / hr
A motor cycle covers 40 km with a speed of 20 km/hr. Find the speed of the motor cycle for the next 40 km journy so that the average speed of the whole journey will be 30 km/hr?
A 70
B 52.5
C 60
D 60.5
The drive-shafts are connected to the differential and wheel hubs through universal joints because the universal joints
A Absorb the vibrations transferred from the surface of the road
B Compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
C Absorb any difference in speed between the left and right wheels when the vehicle is turning
D None of the above
The speed control of universal motor used for sewing machines is by
A friction
B varying the resistance
C tapping the field
D centrifugal mechanism
The speed of a universal motor is generally reduced by using
A gear trains
B V-belts
C brakes
D chains
The speed of a universal motor is usually reduced by using
A gearing
B belts
C brakes
D chains
Speed control of a universal motor is achieved by
A Varying field flux with tapped field windings
B Connecting rheostat in series
C Applying variable voltage by means of silicon controlled rectifier
D All of the above methods

Next steps