Related Questions

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
A 10 mm
B 15 mm
C 20 mm
D 25 mm
The losses occurring in a D.C. generator are given below. Which loss is likely to have highest proportion at rated load of the generator?
A Hysteresis loss
B Field copper loss
C Armature copper loss
D Eddy current loss
If b equals 20% of b, then which one of the following equals 30% of c?
A 0.0006% of a
B 0.006% of a
C 0.06% of a
D 0.6% of a
a, b and c are positive integers. If b equals the square root of a, and if c equals the sum of a and b, which of the following could be the value of e?
A 21
B 30
C 45
D 331
2a equals 10 and--------a equals 5?
A eventually
B thus
C therefore
D thereby
16% of s equals t. 10% of t equals 40. What is the value of s-t?
A 24.00
B 21.00
C 30.00
D 22.00
If 25% of A equals 30% sof B and 24% of B equals 20% of C what is the ration of A to C?
A 1 :1
B 1 : 2
C 2 :1
D 4 : 3
Choose the most appropriate word : 2a equals 10 and ______ a equals 5.
A therefore
B eventually
C thus
D thereby
“Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen terminals of the load”. The above statement is associated with
A Millman’s theorem
B Thevenin’s theorem
C Superposition theorem
D Maximum power transfer theorem
When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
A Is at the maximum distance from CG of the rivet group
B Is at the minimum distance from CG of the rivet group
C Gives the maximum angle between the two forces Fa and Fm
D Gives the minimum angle between the two forces Fa and Fm

Next steps