Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
In a stable control system backlash can cause which of the following?
Backlash in a stable control system may cause:
The transfer function of a discrete time LTI system is given by
$$H\left( z \right) = {{2 - {3 \over 4}{z^{ - 1}}} \over {1 - {3 \over 4}{z^{ - 1}} + {1 \over 8}{z^{ - 2}}}}$$
Consider the following statements:
S1 : The system is stable and causal for
$$ROC:\left| z \right| > {1 \over 2}$$
S2 : The system is stable but not causal for
$$ROC:\left| z \right| S3 : The system is neither stable nor causal for
$$ROC:{1 \over 4} Which one of the following statements is valid?
Consider the following statements related to stability of the control system : 1. Poles in right half-plane (rhp) yield pure exponential decaying natural response. 2. If poles of multiplicity greater than one are present on the imaginary axis, then the system is marginally stable, 3. If one pole is present in right-half plane, the system is unstable. 4. A system is stable if the natural response approaches zero as time approaches  infinity. Which of the above statements is/are not correct ?  
Based on the given para, answer the following question. Sensitivity considerations often are important in the design of Control Systems. Because all physical elements have properties that change with environment and age, we cannot always consider the parameters of the Control System to be completely stationary over the entire operating life of the system. For instance, the winding resistance of an electric motor changes as the temperature of the motor rises during operation. Control systems with electric components may not operate normally when first turned on because of the still-changing system parameters during warmup. This phenomenon is sometimes called “morning sickness”. Most duplicating machines have a warmup period during which time operation is blocked out when first turn on. A good Control System should be: (a) Very sensitive to parameter variations (b) Insensitive to parameter variations (c) Insensitive to input commands (d) Sensitive to input commands Which of the above are correct?
Consider the following provision in Section 300 of the Indian Penal Code:
Several culpable states of mind are referred to with the:
1. intention to cause death
2. knowledge that the act is so imminently dangerous that it must in all probability cause death
3. intention to cause such bodily injury as the offender know to be likely to cause death of the person to whom harm is caused
4. intention of causing such bodily injury as is sufficient in ordinary course of nature to cause death.
The correct order of the sequence in which they are placed in the provision is:
Let h(t) denote the impulse response of a causal system with transfer function $${1 \over {s + 1}}.$$  Consider the following three statements:
S1 : The system is stable.
S2 : $${{h\left( {t + 1} \right)} \over {h\left( t \right)}}$$  independent of t for t > 0.
S3 : A non-causal system with the same transfer function is stable.
For the above system,
Examine the following statements about span of control and identify the ones which are true?
1. More task complexity requires narrower span of control.
2. Routine tasks can have greater span of control than exceptional tasks.
3. When tasks are dissimilar, then span of control can be larger.
4. Spans of control are generally narrower at the top and broader at the bottom of the hierarchy.
Consider the following statements: 1. The effect of feedback is to reduce the system error 2. Feedback increases the gain of the system in one frequency range but decreases in another 3. Feedback can cause a system that is originally stable to become unstable Which of these statements are correct.