Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.<br> <img src="/images/question-image/electrical-engineering/time-response-of-reactive-circuits/1526017228-31.png" title="Time Response of Reactive Circuits mcq question image" alt="Time Response of Reactive Circuits mcq question image">

Referring this circuit, determine the maximum output voltage when a single pulse is applied as shown. The total resistance is 60 Ω.
Time Response of Reactive Circuits mcq question image

Time Response of Reactive Circuits mcq question image

A

2.73 V

B

27.33 V

C

30 V

D

2.67 V

Referring to the give circuit, the output will.
Time Response of Reactive Circuits mcq question image

A

Decay to zero at the end of the pulse

B

Reach 6 V at the end of the pulse

C

Reach 3.78 V at the end of the pulse

D

Reach 5.16 V at the end of the pulse

Referring this figure, on the falling edge.
Time Response of Reactive Circuits mcq question image

A

The resistor voltage drops to -5 V and then goes back to zero exponentially

B

The resistor voltage jumps to -5 V and then goes back to zero exponentially

C

The capacitor voltage remains constant

D

The resistor voltage jumps to +5 V and then decreases exponentially to zero

Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.

A

0 V

B

15 V

C

6.3 V

D

9.45 V

A sinusoidal input voltage V_in of frequency ω is fed to the circuit shown in the figure, where C₁ ≫ C₂. If V_m is the peak value of the input voltage, then output voltage (V_out) is
Electronics mcq question image

A

$$2{V_m}$$

B

$$2{V_o}\sin \omega t$$

C

$$\sqrt 2 {V_m}$$

D

$$\frac{{{V_m}}}{2}\sin \omega t$$

Garima starts walking towards the south from point R. He walks for 5m to reach Point S then turns right and walks for 2m to reach point T from there he turns left and walks for 3m to reach Point Z. He then turns right from point Z and walks for 6m to reach point Y and then turns right and walks for 3m to reach point X. He then turns right from point X and walks for 4m to reach point W and then turns left and walks for 5m to reach point V and then turns left and walks for 4m till point U and stops. What is the shortest distance between point V and point R?

A

4m

B

3m

C

5m

D

8m

For the system of the loads shown in bellow figure, the time required for the 6.6 kg load to fall on the edge, is
Applied Mechanics and Graphic Statics mcq question image

Applied Mechanics and Graphic Statics mcq question image

A

1 sec

B

2 sec

C

3 sec

D

4 sec

The C.G. of the shaded area of the bellow figure from the x-axis is
Applied Mechanics and Graphic Statics mcq question image

A

$$\frac{{\text{a}}}{4}$$

B

$$\frac{{3{\text{a}}}}{4}$$

C

$$\frac{{3{\text{b}}}}{{10}}$$

D

$$\frac{{3{\text{a}}}}{{10}}$$

E

$$\frac{{3{\text{a}}}}{5}$$

Find out the alternative figure which contains figure (X) as its part.
Spotting Out The Embedded Figure mcq question image

A

1

B

2

C

3

D

4

Find out the alternative figure which contains figure (X) as its part.
Spotting Out The Embedded Figure mcq question image

A

1

B

2

C

3

D

4

Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.

Related Questions