Related Questions

Which of the following is the main advantage of an auto-transformer over a two-winding transformer?
A Eddy losses are totally eliminated
B Copper losses are negligible
C Saving in winding material
D Hysteresis losses are reduced
Which of the following is the main advantage of an auto-transformer over a two winding transformer?
A Hysteresis losses are reduced
B Saving in winding material
C Copper losses are negligible
D Eddy losses are totally eliminated
একটি স্টেপ আপ ট্রান্সফরমারে, গৌণ কুণ্ডলীর পাকসংখ্যা মুখ্য কুন্ডলীর পাকসংখ্যার দ্বিগুণ। যদি মূখ্য কুন্ডলীকে কোন পরিবর্তী বিদ্যুৎ লাইনের সাথে সংযুক্ত করা হয়, তাহলে মুখ্য কুণ্ডলীর তুলনায় গৌণ কুণ্ডলীতে- (In a step up transformer, the number of turns in the secondary coil is twice to that of primary coil. If you apply an alternating current in the primary coil, then in the secondary coil compared to the primary coil-)
A তড়িৎ প্রবাহের মান দ্বিগুণ হবে (current will be doubled)
B তড়িৎ প্রবাহের মান অর্ধেক হবে (current will be halved)
C তড়িৎ বিভবের মান অর্ধেক হবে (voltage will be halved)
D তড়িৎ প্রবাহের মান সমান থাকবে (Current will remain the same)
The secondary voltage for a certain power transformer is twice the voltage applied to the primary. The current flowing in the secondary winding will be:
A One-half the primary current
B Same as the primary current
C Twice the primary current
D No more than 10% less than the primary current
E None of the above
Some wire- wound resistors have bifilar winding. This type of winding is used to
A Increase the thermal stability
B Reduce the tolerance
C Reduce the inductance of winding
D Double the power rating of the resistor
________ cooling is the process of dissipating the armature and field winding losses to a cooling medium circulating within the winding insulation wall
A Direct
B Indirect
C Conventional
D Any of the above
Which winding of the transformer has less cross-sectional area?
A Primary winding
B Secondary winding
C Low voltage winding
D High voltage winding
In the transformer following winding has got more cross-sectional area
A Low voltage winding
B High voltage winding
C Primary winding
D Secondary winding
The short circuit in any winding of the transformer is the result of
A mechanical vibration
B insulation failure
C loose connection
D impulse voltage
Which winding in a transformer has more number of turns?
A Low voltage winding
B High voltage winding
C Primary winding
D Secondary winding

Next steps