Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
Which of the following statements are correct for dc shunt motor? 1. Speed of a shunt motor is sufficiently constant 2. For the same current input, its starting torque is not high as that of series motor 3. The motor can be directly coupled to a load such as fan whose torque increases with speed Select the correct answer using the code given below.
Speed regulation of DC shunt motor is calculated by ratio of difference of full load speed and no-load speed with full load speed.
400-V dc shunt motor takes a current of 5.6 A on no-load and 68.3 A on full-load. Armature reaction weakens the field by 3%. What is the ratio of full-load speed to no-load speed? Given: Ra = 0.18 Ω, brush voltage drop= 2 V, Rf = 200 Ω.
What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.
The speed of a DC shunt motor is required to be more than full load speed . This is possible by-
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
The speed of six bikes B1, B2, B3, B4, B5 and B6 has been compared. The speed of the B6 exceeds just three bikes. No two bikes have the same speed. The speed of B4 is more than that of B2 but less than that of B6. The speed of B3 is not less than that of B5. The speed B2 is not minimum. If the speed of B5 is not less than that of B2, then which of the following pair of bikes has more speed than that of B4?
No load speed of the DC shunt motor is 1322 rpm while full load speed is 1182 rpm. What will be the speed regulation?
Speed regulation of a DC shunt motor is equal to 10%, at no load speed of 1400 rpm. What is the full load speed?