Related Questions

Machine A produces bolts at a uniform rate of 120 every 40 seconds and Machine B produces bolts at a uniform rate of 100 every 20 seconds. If the two machines run simultaneously , how many seconds will it take for them to produce a total of 200 bolts.
A 22
B 25
C 28
D 32
Machine A produces bolts at a uniform rate of 120 every 40 seconds, and Machine B produces bolts at a uniform rate of 100 every 20 seconds. If the two machines run simultaneously, how many seconds will it take for them to produce total of 200 bolts?
A 22
B 25
C 28
D 32
Rice costs 1/3rd of the cost of fish and fish and fish costs 5/4th of the cost of meat. How many times is the cost of meat as compared to that of rice?
A 5/12
B 4/5
C 5/4
D 5/3
Which one of the following rail failures is caused by loose fish bolts at expansion joints?
A crushed head
B angular break
C split head
D transverse fissures
For a plate-modulated class C amplifier the plate supply voltage is E. The maximum plate cathode voltage could be almost high as
A 2E
B 3E
C 4E
D 6E
Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface.
A Plane
B Curved
C Ribbed
D Either A or B
A high vapour velocity is required for high plate efficiency in a seive plate coloumn. The satisfactory value of operating vapor velocity for design purpose in seive plate column is about __________ percent of the flooding velocity.
A 45
B 60
C 80
D 95
পাত-দূরত্ব d এবং ধারকত্ব C. এমন একটি সমান্তরাল পাত ধারকের পাত দুটির মাঝখানে d/2 পুরুত্ববিশিষ্ট একটি ধাতব পাত স্থাপন করা হলো। নতুন ধারকত্ব কত হবে? (A metal plate of thickness d/2 is inserted between the plates of a parallel plate capacitor with plate separation d and capacitance C. What is the new capacitance?)
A C/d
B C/2
C 4Cd
D 2c
কোনো ছাত্রাবাসে ৬৫% ছাত্র মাছ পছন্দ করে, ৫৫% ছাত্র সবজি পছন্দ করে এবং ৪০% ছাত্র উভয়টি পছন্দ করে। কত শতাংশ ছাত্র কোনোটিই পছন্দ করে না? ( In a hostel, 65% students like fish, 55% vegetables, and 40% both fish and vegetables. What percentage of the students like none?)
A ৩৫% (35%)
B 85% ( 45%)
C ৬০% (60%)
D ২০% (20%)
Tearing resistance required to tear off the plate per pitch length is (where p = Pitch of rivets, d = Dia. of rivet hole and $${\sigma _{\text{t}}}$$ = Permissible tensile stress for plate material)
A $${\text{pd}}{\sigma _{\text{t}}}$$
B $${\text{pt}}{\sigma _{\text{t}}}$$
C $$\left( {{\text{p}} - {\text{d}}} \right){\sigma _{\text{t}}}$$
D $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}}{\sigma _{\text{t}}}$$

Next steps